A 20 mm-wide mini line light for soft, glare-controlled long-distance illumination
LXV-3LINR is a compact natural-cooling line-scan light. The source highlights its 20 mm width, stable structure, soft output without glare and parallel illumination at longer working distance, including use as a compact replacement for an LCD surface-inspection lamp.
- Housing
- 20 × 30 mm
- 13 mm emitting surface
- Listed lengths
- 120–520 mm
- Five PDF models
- Supply
- 24 V
- All standard rows
- Power
- 5.4–36 W
- Colour dependent
- Cooling
- Natural cooling
- Compact passive housing
- Fluorescent comparison
- 4× brightness
- Versus stated 40 W lamp
Display dust
Soft illumination for surface contamination.
Label and QR code
The source QR example produces clear, uniform characters.
Carton defects
Fit lighting into narrow packaging stations.
LCD surface
Long-distance soft light can replace a larger fluorescent lamp.
Compact backlight geometry, QR-code imaging and low-glare visual testing
The LXV-3LINR220-W source curves show about 270,000 lx near WD 0 mm and a broad, nearly level lateral output. The QR example records clear characters and high uniformity; the backlight comparison states four times the brightness of a 40 W fluorescent lamp in a 20 mm-wide housing.
- Reference
- LXV-3LINR220-W
- Near WD 0 mm
- Approximately 270,000 lx
- Housing comparison
- 20 mm width vs 32 mm fluorescent lamp
- Brightness comparison
- 4× the stated 40 W fluorescent lamp
- Backlight use
- High uniformity and space saving
- QR result
- Clear characters · high uniformity
- Operating range
- 0–40 °C · 20–85% RH, non-condensing
- Life reference
- 50,000 h at 50% factory luminance
- Cable options
- PVC or high-flex extension cable
Select the smallest housing that still covers the scan line
The PDF contains five rows from 120 to 520 mm. Blue uses the higher power value in each row, while red, green and white share the lower value; these assignments must not be transferred between colours.
- 1
Confirm the available envelope
Use the 20 × 30 mm section where width is the limiting constraint.
- 2
Cover the target line
Select 120, 220, 320, 420 or 520 mm with edge allowance.
- 3
Choose wavelength
Keep the colour-specific power value with the exact model row.
- 4
Match controller and mounting
The PDF permits strobe, analog or digital control; confirm power, trigger requirements and M3 slots.
Read the source model pattern
LXV-3LINR##-R/G/B/W/IR/UV- LXV-
- Product prefix
- 3LINR
- Mini line-scan light
- ##
- Overall length
- R/G/B/W/IR/UV
- Colour or wavelength code
LXV-3LINR model range
Values remain bound to their own model row; colour references are rendered as readable codes.
| Model | Colour | Voltage | Power | Weight | Cooling | Adapted controller | Drawing | Common |
|---|---|---|---|---|---|---|---|---|
| LXV-3LINR120 | B / R / G / W | 24 V | B 7.2 W · R/G/W 5.4 W | 124 g | Natural cooling | Strobe / analog / digital controller | 1 | Y |
| LXV-3LINR220 | B / R / G / W | 24 V | B 14.4 W · R/G/W 10.8 W | 214 g | Natural cooling | Strobe / analog / digital controller | 1 | Y |
| LXV-3LINR320 | B / R / G / W | 24 V | B 21.6 W · R/G/W 16.2 W | 289 g | Natural cooling | Strobe / analog / digital controller | 1 | Y |
| LXV-3LINR420 | B / R / G / W | 24 V | B 28.8 W · R/G/W 21.6 W | 358 g | Natural cooling | Strobe / analog / digital controller | 1 | Y |
| LXV-3LINR520 | B / R / G / W | 24 V | B 36.0 W · R/G/W 27.0 W | 410 g | Natural cooling | Strobe / analog / digital controller | 1 | Y |
Lock the underside through a mounting plate into the M3 nut slots
The source mounting method uses an M3 screw and nut through the plate. The complete 120–520 drawing preserves the 13 mm emitting surface and cable envelope.
- Align the underside with the mounting plate.
- Pass the M3 screw through the plate.
- Tighten into the housing’s M3 nut slot.
- Keep the 500 mm cable reference and optical face clear.
