Dome Lights for Glossy Curves
Use a dome when direct light glares off a glossy or curved part. Light arrives from around the part, so printed marks and colour stay visible. Read the opening size on the dome model row.
What applications are dome lights for glossy curves best suited for?
Open the series, then send the part.
- Glossy plastic and curved metal
- Packaging and caps
- Printed marks on uneven parts
- Shadow reduction around raised features
When should you avoid using dome lights for glossy curves?
Use another geometry when the surface does this.
- Small scratches need dark-field contrast
- The part is too large for the dome opening
- The camera needs a very long working distance
What are the primary selection inputs for dome lights for glossy curves?
Send these with the part.
- Dome opening size
- Object height
- Camera viewing hole
- Diffusion level
- Wavelength and brightness
What are the key engineering specifications for dome lights for glossy curves?
Wavelength, working distance, voltage, cooling, and strobe sit on the model row.
| Design Parameter | Standard Engineering Benchmark |
|---|---|
| Optical Geometry | Uniform 360° diffuse integration sphere illumination suppressing specular glare |
| Available Wavelengths | White (6500K), Red (625nm), Blue (470nm) |
| Typical Working Distance | Listed on each dome model row |
| Operating Voltage | 24V DC standard |
| Cooling Method | Integrated aluminum dome shell heat dissipation |
| Strobe Overdrive Capability | Standard pulse and continuous illumination modes |
What are the most frequently asked questions about dome lights for glossy curves?
When is Dome Lights for Glossy Curves useful?
Use a dome when direct light glares off a glossy or curved part. Light arrives from around the part, so printed marks and colour stay visible. Read the opening size on the dome model row.
What information is needed to select a light?
Start with Dome opening size, Object height, Camera viewing hole. Share target images and the inspection requirement so the arrangement can be checked on the actual application.