What inspection variables should be evaluated?
Check fibre interfaces, speckle and output uniformity in laser-coupled systems. Follow the equipment instructions for optical protection.
What lighting geometry fits this inspection task?
A fibre system separates the light source from its output. Match the source interface, guide diameter, numerical aperture and output geometry. Spot, line and ring guides suit different spaces; coupling and bend radius affect the light reaching the sample.
For comparisons, use the same guide, working distance and camera settings. Check connector cleanliness, mounting and temperature. Source output is not the same as illuminance on the workpiece. Judge the complete optical path by usable contrast and exposure margin.
Related product family?
LXV-2SLG
Bring light into compact spaces with a fiber guide.
Communication: RS232/LAN
Light output ports: 1
Compatible bundle diameter: Bundle diameter Φ6-14mm
Beam angle: Full angle 30°
Before choosing a configuration?
For selection, specify the field of view, smallest target feature, height variation, cycle time and installation space. Use the specific product page and drawing to verify electrical ratings, dimensions and compatibility.
Matching the source and light guide?
Check the input aperture, numerical aperture, connector and thermal limits of the receiving light guide. Optical power at the source is not the same as useful illumination at the workpiece. Coupling losses and output geometry influence the result.
Measure the illuminated area and its uniformity at the working distance. Test exposure margin with the intended camera and lens. Follow the source's specified operating and laser-safety requirements; do not infer safe power limits from another illuminator with a similar connector.
What do the optical setup and sample images show?
