What inspection variables should be evaluated?
Camera, lens, fibre and filters must support the target SWIR band. Any component can limit the available signal.
What lighting geometry fits this inspection task?
SWIR imaging relies on transmission or absorption differences at the chosen wavelength. A material that blocks visible light is not necessarily transparent throughout the infrared range. Thickness, fillers and package construction need individual checks.
Confirm that the camera, lens, filters and guide support the selected band. Compare transmitted and reflected light using known good and defective samples. Record signal-to-noise performance, exposure and temperature. Appearance or material name alone cannot establish whether internal structures will be visible.
Related product family?
LXV-2SLG-SWIR
Bring light into compact spaces with a fiber guide.
Output channels: 1 channel
Compatible bundle diameter: Bundle Φ6-14mm
Drive mode: Constant-current drive
Brightness levels: 256/1024 levels available
Before choosing a configuration?
For selection, specify the field of view, smallest target feature, height variation, cycle time and installation space. Use the specific product page and drawing to verify electrical ratings, dimensions and compatibility.
Matching every SWIR component?
Check spectral coverage through the complete system: illuminator, fibre, coupler, lens, protective window and camera. A component that works in visible light may introduce substantial loss in the selected SWIR band.
Measure a reference target and the actual material at the intended distance. Compare signal, noise and spatial detail. Keep the wavelength, optical configuration and exposure with the captured examples so that later comparisons remain meaningful.
What do the optical setup and sample images show?
