What inspection variables should be evaluated?
Account for vibration, fibre bend radius and output-head mounting. Reassembly should not unintentionally change the illumination geometry.
What lighting geometry fits this inspection task?
A fibre system separates the light source from its output. Match the source interface, guide diameter, numerical aperture and output geometry. Spot, line and ring guides suit different spaces; coupling and bend radius affect the light reaching the sample.
For comparisons, use the same guide, working distance and camera settings. Check connector cleanliness, mounting and temperature. Source output is not the same as illuminance on the workpiece. Judge the complete optical path by usable contrast and exposure margin.
Related product family?
LXV-2SLG
Bring light into compact spaces with a fiber guide.
Communication: RS232/LAN
Light output ports: 1
Compatible bundle diameter: Bundle diameter Φ6-14mm
Beam angle: Full angle 30°
Before choosing a configuration?
For selection, specify the field of view, smallest target feature, height variation, cycle time and installation space. Use the specific product page and drawing to verify electrical ratings, dimensions and compatibility.
Routing light in semiconductor equipment?
Plan the source location, fibre route and output geometry as one assembly. Check bend-radius and connector requirements from the selected guide. Keep the output fixed relative to the optical axis and specimen.
Evaluate heat near the workpiece, access for replacement and contamination control in the intended machine. Record the illumination at the output after all routing and coupling components are installed, rather than relying on the source rating alone.
What do the optical setup and sample images show?
