Independently controlled RGB bar light for colour-pattern inspection
LXV-2BRS50030-RGB integrates red, green and blue LED arrays into one 512 mm bar. Each primary-colour channel can be adjusted separately, allowing the inspection recipe to switch or mix spectral response while the camera and light remain fixed.
- Model
- LXV-2BRS50030-RGB
- Single documented configuration
- Channels
- Red / green / blue
- Independent intensity
- Boundary
- 512 × 36 × 26 mm
- Long bar housing
- Supply
- 24 V
- 38.4 W
Colour-pattern inspection
Compare red, green and blue responses to separate printed colours, registration, coating or material differences.
Channel-by-channel classification
Capture each primary colour independently so the most discriminating response is not hidden by a mixed white image.
Fixed-geometry colour switching
Change the spectral recipe electronically without moving the bar, camera or target.
Long coloured features
Cover a 500-class inspection path while preserving one registered RGB illumination axis.
How the optical structure solves the inspection problem
Review the product-specific optical behavior, confirmed values and technical graphics together before selecting the final configuration.
- Three primary-colour arrays
- Red, green and blue emitters share the documented bar structure.
- Independent brightness
- Each colour channel can be controlled separately before any mixture is created.
- Colour switching
- The controller can select the required channel without a mechanical light change.
- Shared field geometry
- All three channels illuminate from the same housing, supporting registered response comparison.
- Model-specific load
- The combined configuration requires 24 V / 38.4 W electrical capacity and production-duty thermal validation.
Select from the actual optical, mechanical and electrical requirement
Do not select a custom light from appearance alone. Confirm target, contrast, field, interfaces and load together.
- 1
Define the colour difference
Identify which print, coating or material response must be separated.
- 2
Test RGB independently
Capture the same target under red, green and blue before selecting any mixture.
- 3
Choose the simplest recipe
Use one channel when it solves the task; mix only when the combined response improves repeatability.
- 4
Provide three outputs
Match each colour to an independently adjustable controller channel within the total load.
- 5
Validate production timing
Store intensity and exposure values for the final cycle speed and acceptance samples.
Read the product model pattern
LXV-2BRS50030-RGB- LXV
- Product prefix
- 2BRS
- Multi-colour bar-light family
- 50030
- Documented size code
- RGB
- Red, green and blue channels
LXV-2BRS50030-RGB model range
Values remain attached to their own model and are not transferred between designs.
| Model | Channels | Boundary | Voltage | Power |
|---|---|---|---|---|
| LXV-2BRS50030-RGB | Red + green + blue | L512 × W36 × H26 mm | 24 V | 38.4 W |
Release the exact product drawing with the complete inspection station
Dimensions, openings, mounting, channels and thermal clearances belong to the selected product only.
- 01
Reserve the complete 512 × 36 × 26 mm body and keep the full long-axis emitting direction unobstructed.
- 02
Align the bar and camera once, then compare RGB responses without changing the mechanical geometry.
- 03
Use only mounting-hole, cable and connector coordinates from the exact product drawing; no independent PDF drawing is available for this model.
- 04
Connect red, green and blue to separate controller outputs and label each channel before commissioning.
- 05
Provide 24 V / 38.4 W total capacity, including controller and cable margin appropriate to the validated duty.
- 06
Validate colour separation, field uniformity, channel balance and housing temperature at production exposure.
