Custom ring backlight with multiple inspection openings
LXV-FTR206146-W is a 15 mm thin white backlight with two perpendicular rounded inspection ports in a 206 × 146 mm emitting field. The custom opening pattern supports several simultaneous camera paths for four-side contour, PCB, large-part and print/packaging inspection, and the illuminated surface may also be used as forward lighting.
- Model
- LXV-FTR206146-W
- Single product-specific design
- Boundary
- 220 × 160 × 15 mm
- Complete panel
- Emitting area
- 206 × 146 mm
- Two rounded ports
- Supply
- 24 V
- 26.2 W
Four-side contour measurement
Arrange several camera paths through the two perpendicular openings.
PCB electronic components
Use the broad field and access ports for component and character inspection.
Large-part defects
Illuminate a wide target while preserving dedicated viewing axes.
Printing and packaging defects
Inspect contour, print and assembly position with transmitted or forward illumination.
How the optical structure solves the inspection problem
Review the product-specific optical behavior, confirmed values and technical graphics together before selecting the final configuration.
- Two inspection ports
- Horizontal and vertical rounded openings provide multiple optical access directions.
- Multi-camera arrangement
- Several cameras can share one illuminated field to reduce separate-lighting hardware.
- Thin broad field
- The 206 × 146 mm emitting surface is contained in a 15 mm profile.
- Forward-light option
- The illuminated surface can also be applied as direct illumination when the station geometry requires it.
Select from the actual optical, mechanical and electrical requirement
Do not select a custom light from appearance alone. Confirm target, contrast, field, interfaces and load together.
- 1
Map every optical axis
Fix camera positions and viewing directions before approving the opening pattern.
- 2
Fit the illuminated field
Keep the required contour or inspection region inside 206 × 146 mm.
- 3
Validate light mode
Test transmitted silhouette and forward-light contrast on the real target.
- 4
Confirm panel and load
Reserve 220 × 160 × 15 mm and provide 24 V / 26.2 W capacity.
Read the product model pattern
LXV-FTR206146-W- LXV
- Product prefix
- FTR
- Customized ring-backlight family
- 206146
- 206 × 146 mm emitting field
- W
- White output
LXV-FTR206146-W model range
Values remain attached to their own model and are not transferred between designs.
| Model | Output | Boundary | Emitting area | Inspection ports | Voltage | Power |
|---|---|---|---|---|---|---|
| LXV-FTR206146-W | White | L220 × W160 × H15 mm | 206 × 146 mm | Horizontal + vertical rounded ports | 24 V | 26.2 W |
Release the exact product drawing with the complete inspection station
Dimensions, openings, mounting, channels and thermal clearances belong to the selected product only.
- 01
Align each camera axis through the appropriate horizontal or vertical rounded opening.
- 02
Maintain the shown 45 mm offsets, 130 mm horizontal straight length, 50 mm vertical straight length and R12/R10 port radii.
- 03
Reserve the complete 220 × 160 × 15 mm panel while keeping the 206 × 146 mm emitting field unobstructed.
- 04
Fasten through the four Ø3.4 through holes on the 210 × 150 mm reference rectangle.
- 05
Confirm connector, cable route, camera clearance and service access before releasing the fixture.
- 06
Provide 24 V / 26.2 W capacity, then validate uniformity, contour contrast, exposure and temperature at production duty.
