Four-sided 20° bar illumination for edge contour, barcode and package-wrinkle inspection
LXV-RIH combines four inward-facing bar lights around a rectangular opening. The preserved product record states a 20° bar angle so illumination reaches the target from four sides, strengthening edge and contour information for barcode and cigarette-package wrinkle inspection.
- Verified model rows
- 6
- Two preserved website specification groups
- Supply
- 24 V
- Every retained model row
- Power range
- 5.8–21.6 W
- Model and colour-group dependent
- Housing range
- 156–350 mm
- Longest retained outer dimension
- Bar arrangement
- 4 × 20°
- Four-sided inward illumination
Barcode inspection
Illuminate printed bars and their surrounding package edges from four directions so orientation-dependent shadowing is reduced.
Cigarette-package wrinkles
Use the converging oblique field to strengthen folds and edge-height changes on the package surface.
Product-edge contour
Surround the camera field with four bars so the complete perimeter receives oblique illumination.
Rectangular fields
Select the housing whose retained L × W envelope covers the target and leaves the camera sight line clear.
Verified four-sided construction and the limits of the available source record
The 2025 light-source PDF contains no LXV-RIH product module. The website archive preserves the product photograph shown in the page hero, one 20° four-bar construction statement, one application statement and six specification rows. No optical curve, captured-result comparison or local mechanical drawing file survives, so this page does not borrow evidence from another family or present invented diagrams.
- Document status
- No matching LXV-RIH family in 2025 光源 series_LXV.pdf
- Preserved construction
- Four bar lights arranged at 20°
- Documented purpose
- Product-edge contour imaging
- Documented applications
- Barcode and cigarette-package wrinkle inspection
- Retained colours
- R / B / G / W for five rows; R for LXV-RIH12080-R
- Unavailable evidence
- No optical chart, result comparison or local drawing PDF
Select only from the six retained rows and keep each row intact
All retained rows use 24 V, but their external dimensions, colour availability and power differ. The five R/B/G/W rows use two power figures as stored in the source table; the red-only LXV-RIH12080-R row has one 5.8 W value.
- 1
Define the field and defect
Record target width and height, barcode direction, wrinkle direction and the smallest edge change that must remain visible.
- 2
Fit the complete housing
Compare the exact L × W × H envelope below with the available machine opening and camera sight line.
- 3
Match colour and power
Keep the colour group and power from the same source row; do not transfer a value between housings.
- 4
Validate on production samples
Confirm four-side contour balance, glare, exposure, controller capacity and acceptance criteria on representative good and defective parts.
Read the product model pattern
LXV-RIH[horizontal field][vertical field]-R/B/G/W- LXV
- Product prefix
- RIH
- Four-sided industrial bar-light family
- ## × ##
- Size identifier embedded in the retained model code
- R/B/G/W
- Retained visible-colour choices; confirm the exact row before ordering
LXV-RIH model and optical selection tables
Each value remains attached to its own model or lens row.
Four-colour LXV-RIH models
| Model | Colours | External dimensions | Supply | Retained power values |
|---|---|---|---|---|
| LXV-RIH11075-R/BGW | Red / blue / green / white | 156 × 113 × 44 mm | 24 V | 12.3 W / 14.1 W |
| LXV-RIH15075-R/BGW | Red / blue / green / white | 200 × 116 × 42 mm | 24 V | 13.0 W / 16.2 W |
| LXV-RIH125125-R/BGW | Red / blue / green / white | 173 × 165 × 42 mm | 24 V | 12.3 W / 15.2 W |
| LXV-RIH232140-R/BGW | Red / blue / green / white | 280 × 180 × 42 mm | 24 V | 14.1 W / 17.3 W |
| LXV-RIH302156-R/BGW | Red / blue / green / white | 350 × 200 × 42 mm | 24 V | 17.3 W / 21.6 W |
Red-only retained model
| Model | Colour | External dimensions | Supply | Power |
|---|---|---|---|---|
| LXV-RIH12080-R | Red | 165 × 125 × 23 mm | 24 V | 5.8 W |
Source boundary and selection controls
| Item | Verified status | Required action |
|---|---|---|
| 2025 product PDF | LXV-RIH not present | Do not attribute these rows to the 2025 PDF |
| UV / IR | Website table says customisation is available | Confirm wavelength, output and safety before specification |
| Mechanical drawings | Two legacy paths are referenced but the files are absent | Obtain and verify the drawing for the selected model before release |
| Optical performance | No curve or result image retained | Run a representative-part imaging trial |
Reserve the exact housing envelope and obtain the missing model drawing before mechanical release
The native tables provide the only verified dimensions currently available. They are sufficient for preliminary envelope comparison, not for hole placement, cable-exit or connector-clearance approval.
- 01
Choose one exact model row and reserve its complete L × W × H housing envelope.
- 02
Keep the camera view unobstructed through the rectangular opening and centre the four-sided field over the target.
- 03
Confirm 24 V controller capacity against the selected row and the required colour configuration.
- 04
Obtain the matching original mechanical drawing, then verify mounting holes, cable exit, connector and service clearances before production release.
