Synchronous control module for coordinated controllers and cameras
LXV-SHT2430-1 supplies six timing outputs and three operating modes: countdown, external I/O control and signal generation. One module can coordinate controllers representing up to 24 channels and as many as eight cameras.
- Outputs
- 6 channels
- CH1–CH6
- Capacity
- 24 controller channels
- Up to 8 cameras
- Modes
- 3
- Countdown / external I/O / generator
- Communication
- RS232 / LAN
- 19200 bps
Multi-controller cells
Issue a common timing plan across several lighting controllers.
Multi-camera systems
Synchronize up to eight camera trigger paths.
Timed sequences
Run a fixed output level for a set countdown period.
Signal generation
Set high/low time and frequency without an external generator.
Six-output synchronization with countdown, external I/O and signal-generator modes
CH1–CH4 provide 24 V high-level controller triggers, while CH5–CH6 provide 12.3–12.8 V camera-trigger outputs. The external terminal accepts separate open and close inputs.
- Countdown mode
- An external start initiates the set output level; output ends when the countdown completes.
- External I/O mode
- Output starts at the set level and stops when the external input stops.
- Signal-generator mode
- High time, low time and frequency can be set on the module.
- Ports
- DC 24 V input; open and close trigger inputs accept 5–24 V; settings save automatically at power-off.
Match timing, voltage, load and channel count
Select the exact controller row from the connected lights, trigger plan and communication requirement.
- 1
Count devices
Confirm the number of controllers, lighting channels and cameras.
- 2
Choose operating mode
Use countdown, external I/O or internal signal generation.
- 3
Map outputs
Assign CH1–CH4 to controller triggering and CH5–CH6 to camera triggering.
- 4
Set and store timing
Configure levels and timing through the panel, RS232 or LAN.
Read the controller model pattern
LXV-SHT 24 30-1- LXV
- Product prefix
- SHT
- Synchronous control module
- 24
- 24 V input class
- 30
- Output power class
- 1
- Module configuration
LXV-SHT2430-1 model range
Each voltage, timing, channel and dimension value remains attached to its own model.
| Model | Outputs | Controller output | Camera output | Trigger input | Input supply | Communication |
|---|---|---|---|---|---|---|
| LXV-SHT2430-1 | 6 | CH1–CH4: 24 V high / 0 V low | CH5–CH6: 12.3–12.8 V high / 0 V low | 5–24 V high-level effective | DC 24 V, >1.5 A | RS232 / LAN |
Wire signal, load and communication before releasing the controller
Use the exact model row and mechanical drawing; validate the complete light, camera and trigger sequence together.
- 01
Supply DC 24 V with input current greater than 1.5 A.
- 02
Connect open/close terminal inputs only to suitable electronic NPN or PNP drivers.
- 03
Map controller and camera outputs before setting timing.
- 04
Reserve the 78 × 105 × 104 mm outer envelope and connector access.
