LXV-3APC | 3APC Analog Controller

Inspection fit

Stepless constant-voltage control for one to four machine-vision lights

LXV-3APC is an analogue controller family with manual stepless output adjustment, constant-voltage drive and high- or optional low-level triggering. Select the controller from the total connected load, the maximum load on one channel and the required channel count.

Output range: 12–24 V; Manually adjustable
Channel options: 1 / 2 / 4; Model-dependent
Total output: 24–180 W; Use the exact model row
Trigger input: 5–24 V; 0 V low-level option
Fastest delay: ≤3 μs; 120/200 model group

Manual intensity setting

Set the output through the front adjustment knob where a direct local luminance control is required.

PLC or sensor triggering

Use the defined NPN or PNP external-trigger connection between the production signal and controller.

Single- or multi-light stations

Choose one, two or four channels without exceeding either the total or one-channel power limit.

Constant or triggered operation

Use the TS switch for constant on/off control or the trigger input for synchronized illumination.

Technical evidence

Working topology, operating parameters and trigger response

The controller connects the PLC or sensor trigger to one or more constant-voltage lights through the stated trigger and LED cables.

Controller working systemThe PLC or sensor supplies the trigger input; the selected LXV-3APC output powers the connected light through its LED cable.

LXV-3APC operating parameters
Function	Operating value
Channel options	1, 2 or 4
Input supply	100–240 VAC, 50/60 Hz
Adjustable output	12–24 V
Luminance adjustment	Manual adjustment knob
Adjustment range	Stepless
Drive mode	Constant voltage
Auxiliary output	12 V / 500 mA
Constant on/off	TS toggle switch
External trigger	High level 5–24 V; low level 0 V optional

Trigger timing

The power group determines the stated response interval

T1 is the delay before the light turns on, T2 is the lighting interval, and T3 is the delay before the light turns off. For the 24 W and 60 W groups, T1 and T3 are stated as no more than 80 μs. For the 120 W and 200 model groups, T1 and T3 are stated as no more than 3 μs.

24 W / 60 W sequenceAt 100 Hz and 50% duty cycle, the timing example gives T2 = 4,920 μs after allowing for the 80 μs response intervals.

120 W / 200 model-group sequenceAt 100 Hz and 50% duty cycle, the timing example gives T2 = 4,997 μs with the 3 μs response intervals.

NPN and PNP trigger connectionFollow the shown Input+ and Input− polarity and the 5–24 V relationship for the selected trigger device.

Model selection

Select voltage, total power and channel count as one model

The 24200 model code is listed with a 180 W total-output limit in the product table; use the stated row rather than inferring power from the code.

1
Count the lights
Choose the one-, two- or four-channel suffix required by the station.
2
Calculate each channel
Check the highest connected light against the one-channel maximum.
3
Calculate the combined load
Keep the sum of all channels within the listed total-output limit.
4
Match the housing
Use dimension group 1 for 2424/2460 or group 2 for 24120/24200.

Model structureLXV-3APC [voltage] [total-output code]-[channels]

LXV: LuxMV product prefix
3APC: Analogue controller family
24 / 24–200: Output-voltage and family power coding
1 / 2 / 4: Number of channels

LXV-3APC controller models
Model	Output	Total power	One-channel maximum	Channels	Dimension group	Trigger
LXV-3APC2424-1	12–24 V	24 W	24 W	1	1	5–24 V
LXV-3APC2424-2	12–24 V	24 W	24 W	2	1	5–24 V
LXV-3APC2424-4	12–24 V	24 W	24 W	4	1	5–24 V
LXV-3APC2460-1	12–24 V	60 W	60 W	1	1	5–24 V
LXV-3APC2460-2	12–24 V	60 W	30 W	2	1	5–24 V
LXV-3APC2460-4	12–24 V	60 W	24 W	4	1	5–24 V
LXV-3APC24120-1	12–24 V	120 W	120 W	1	2	5–24 V
LXV-3APC24120-2	12–24 V	120 W	90 W	2	2	5–24 V
LXV-3APC24120-4	12–24 V	120 W	60 W	4	2	5–24 V
LXV-3APC24200-1	12–24 V	180 W	180 W	1	2	5–24 V
LXV-3APC24200-2	12–24 V	180 W	90 W	2	2	5–24 V
LXV-3APC24200-4	12–24 V	180 W	60 W	4	2	5–24 V

Integration & dimensions

Reserve the correct housing, DIN-rail base and connector access

The low- and medium-power groups use different front widths and overall depths. Match the selected model row to the corresponding drawing before panel layout.

LXV-3APC housing groups
Group	Models	Body width	Overall width	Height	Body / mounting / overall depth
1	2424 and 2460, 1/2/4 channels	50 mm	80 mm	156 mm	71 / 110 / 132 mm
2	24120 and 24200, 1/2/4 channels	70 mm	100 mm	156 mm	71 / 110 / 134 mm

Low- and medium-power housing dimensionsThe complete drawing retains the front controls, side depth, DIN guide-rail mounting base, removable base and four M3 mounting-hole relationship for both groups.

PRODUCT FAQ

Questions to confirm before choosing LXV-3APC

How should I size the connected load for LXV-3APC?

Check both limits in the same model row: every connected light must remain within the one-channel maximum, and the combined load across all active channels must remain within the total-output limit.

What trigger inputs does LXV-3APC support?

The listed standard external trigger is a 5–24 V high-level input, with a 0 V low-level option. NPN and PNP wiring are supported, and the response interval depends on the selected power group.

What is LXV-3APC used for?

LXV-3APC provides manual stepless constant-voltage control and external-trigger operation for one to four connected machine-vision lights. The exact model is selected by total load, one-channel load and channel count.

How can I discuss whether LXV-3APC fits my inspection task?

Share each light model and power, the combined load, required channel count, trigger device and available panel space so the exact controller row and housing group can be checked.

Can LXV-3APC be quoted or configured for a specific project?

Use the enquiry form with the exact model row and connected-light loads. Confirm channel count, output setting, trigger polarity, input supply, cable access, DIN-rail mounting and housing dimensions before release.

DIRECT ENQUIRY

Get a Customized Quotation

Need specific dimensions, custom wavelength LED combinations, or special cabling? Our optical engineering and sales offices are ready to assist.

Sales contact

Response path: Include the inspection constraints with your enquiry

Sample Testing Support

Share target workpiece samples, drawings, and imaging requirements so the lighting setup can be discussed against real inspection constraints.

Engineering Inquiry & Selection Support

Select your request type below. Our optical engineering and sales team replies directly with technical feedback, quotation, or sample loan procedures.

All inspection requirements, target drawings, and sample test images remain strictly confidential.

Full Name

Corporate Email

Company / Institution

How did you first hear about LuxMV? (optional)

Message / Requirements

Request 3D STEP ModelDiscuss Evaluation Options

Add technical context (optional, helps speed evaluation)

Inspection target, defect, or applicationPart material and surface conditionCamera, lens, field of view, and working distanceLine speed, exposure, trigger, and mounting limits

For drawings or sample images, please include a secure download link or email them after receiving your inquiry reference. Secure file upload will be added only after private storage and malware scanning are in place.

Zero-Risk Optical Evaluation: Free sample loan & laboratory lighting report with your actual workpieces. Strict NDA protection.

Protected by reCAPTCHA. Google Privacy Policy and Terms of Service apply.

Related Products

Loading product details

LXV-3APC controller models

Model

Output

Total power

One-channel maximum

Channels

Dimension group

Trigger

LXV-3APC2424-1

12–24 V

24 W

5–24 V

LXV-3APC2424-2

12–24 V

24 W

5–24 V

LXV-3APC2424-4

12–24 V

24 W

5–24 V

LXV-3APC2460-1

12–24 V

60 W

5–24 V

LXV-3APC2460-2

12–24 V

60 W

30 W

5–24 V

LXV-3APC2460-4

12–24 V

60 W

24 W

5–24 V

LXV-3APC24120-1

12–24 V

120 W

5–24 V

LXV-3APC24120-2

12–24 V

120 W

90 W

5–24 V

LXV-3APC24120-4

12–24 V

120 W

60 W

5–24 V

LXV-3APC24200-1

12–24 V

180 W

5–24 V

LXV-3APC24200-2

12–24 V

180 W

90 W

5–24 V

LXV-3APC24200-4

12–24 V

180 W

60 W

5–24 V

Questions to confirm before choosing LXV-3APC

How should I size the connected load for LXV-3APC?

Check both limits in the same model row: every connected light must remain within the one-channel maximum, and the combined load across all active channels must remain within the total-output limit.

What trigger inputs does LXV-3APC support?

The listed standard external trigger is a 5–24 V high-level input, with a 0 V low-level option. NPN and PNP wiring are supported, and the response interval depends on the selected power group.

What is LXV-3APC used for?

How can I discuss whether LXV-3APC fits my inspection task?

Share each light model and power, the combined load, required channel count, trigger device and available panel space so the exact controller row and housing group can be checked.

Stepless constant-voltage control for one to four machine-vision lights

Manual intensity setting

PLC or sensor triggering

Single- or multi-light stations

Constant or triggered operation

Working topology, operating parameters and trigger response

Select voltage, total power and channel count as one model

Count the lights

Calculate each channel

Calculate the combined load

Match the housing

Reserve the correct housing, DIN-rail base and connector access

Questions to confirm before choosing LXV-3APC

How should I size the connected load for LXV-3APC?

What trigger inputs does LXV-3APC support?

What is LXV-3APC used for?

How can I discuss whether LXV-3APC fits my inspection task?

Can LXV-3APC be quoted or configured for a specific project?

Get a Customized Quotation

Sample Testing Support

Engineering Inquiry & Selection Support

Related Products

2APC Analog Controller Machine Vision Light

3ACC Constant Current Controller Led Japan

3DPA High Power Constant Current Controller Led Japan

3DPC Digital Controller Machine Vision Light

Stepless constant-voltage control for one to four machine-vision lights

Manual intensity setting

PLC or sensor triggering

Single- or multi-light stations

Constant or triggered operation

Working topology, operating parameters and trigger response

Select voltage, total power and channel count as one model

Count the lights

Calculate each channel

Calculate the combined load

Match the housing

Reserve the correct housing, DIN-rail base and connector access

Questions to confirm before choosing LXV-3APC

How should I size the connected load for LXV-3APC?

What trigger inputs does LXV-3APC support?

What is LXV-3APC used for?

How can I discuss whether LXV-3APC fits my inspection task?

Can LXV-3APC be quoted or configured for a specific project?

Get a Customized Quotation

Sample Testing Support

Engineering Inquiry & Selection Support

Related Products

2APC Analog Controller Machine Vision Light

3ACC Constant Current Controller Led Japan

3DPA High Power Constant Current Controller Led Japan

3DPC Digital Controller Machine Vision Light