Ultra-thin large-area flank backlight for contour and liquid-impurity inspection
LXV-FTCR700700-W distributes LEDs around a large side-lit panel and uses a dedicated light-guide plate to create a uniform 700 × 700 mm transmitted field. Its shallow panel and two camera openings support large contours and glass-bottle liquid-impurity inspection.
- Model
- LXV-FTCR700700-W
- Single verified design
- Emitting surface
- 700 × 700 mm
- Large transmitted field
- Panel / max profile
- 16.5 / 31.5 mm
- Ultra-thin construction
- Supply
- 24 V
- 19.2 W
Contour inspection
Create a high-contrast silhouette across a broad 700 × 700 mm field.
Glass-bottle liquid impurities
Transmit light through the bottle so suspended or internal contamination interrupts the bright field.
Dual-camera inspection
Use the two aligned openings for separate imaging axes over one illuminated plane.
Shallow large-field stations
Place a large backlight where the machine has limited depth but can support the full panel.
How the optical structure solves the inspection problem
Review the product-specific optical behavior, confirmed values and technical graphics together before selecting the final configuration.
- Perimeter LED distribution
- LEDs are regularly arranged around the panel instead of occupying the viewing field.
- Light-guide uniformity
- The dedicated guide plate spreads the side light across the 700 × 700 mm emitting surface.
- Dual optical openings
- Two outer Ø68 / inner Ø53 openings are spaced 280 mm centre-to-centre.
- Mechanical provisions
- The 734 mm square panel has sixteen Ø5.5 through holes and two 1000 mm leads.
Select from the actual optical, mechanical and electrical requirement
Do not select a custom light from appearance alone. Confirm target, contrast, field, interfaces and load together.
- 1
Define the transmitted target
Confirm whether the task is outer-contour measurement or liquid-impurity detection.
- 2
Check both camera axes
Match the two opening centres to the fixed 280 mm spacing and Ø53 clear paths.
- 3
Check target field
Keep the complete inspected silhouette within the 700 × 700 mm emitting surface.
- 4
Confirm power and support
Provide 24 V / 19.2 W and support the broad, shallow panel without flex.
Read the product model pattern
LXV-FTCR700700-W- LXV
- Product prefix
- FTCR
- Ultra-thin ring flank backlight family
- 700700
- 700 × 700 mm emitting surface
- W
- White output
LXV-FTCR700700-W model range
Values remain attached to their own model and are not transferred between designs.
| Model | Colour | Boundary | Panel / max profile | Emitting surface | Camera openings | Voltage | Power |
|---|---|---|---|---|---|---|---|
| LXV-FTCR700700-W | White | L734 × W734 mm | 16.5 / 31.5 mm | 700 × 700 mm | 2 × Ø68 outer / Ø53 clear, 280 mm centres | 24 V | 19.2 W |
Release the exact product drawing with the complete inspection station
Dimensions, openings, mounting, channels and thermal clearances belong to the selected product only.
- 01
Reserve the complete 734 × 734 mm boundary, 16.5 mm panel depth and 31.5 mm maximum side profile.
- 02
Align both camera axes through the Ø68 outer / Ø53 inner openings at 280 mm centre spacing.
- 03
Keep the 700 × 700 mm emitting surface and its 724 mm frame region unobstructed.
- 04
Fasten and support the panel through all applicable sixteen Ø5.5 through holes without twisting the emitting plane.
- 05
Route both 1000 mm leads from the lower corners without loading the shallow housing.
- 06
Provide 24 V / 19.2 W capacity and validate field uniformity, exposure and impurity contrast on the actual bottle.
