Halogen line-scan light for concentrated full-spectrum illumination
LXV-LIN20449-WN uses a brightness-adjustable halogen source to deliver concentrated, high-brightness illumination with good colour rendering. The 204 × 20 mm emitting line suits detailed material inspection, while the 110 W heat load requires a well-ventilated installation.
- Model
- LXV-LIN20449-WN
- Single verified design
- Emitting surface
- 204 × 20 mm
- Concentrated line output
- Boundary
- 220 × 106 × 49 mm
- Complete housing
- Supply
- 24 V
- 110 W
Ancient calligraphy and paintings
Use good colour rendering to inspect brushwork, pigments and surface detail.
Graphite sample defects
Concentrate illumination along the inspected graphite region to reveal material variation.
Antique ceramic patterns
Inspect coloured patterns and fine surface detail under the halogen source.
Concentrated-irradiation stations
Apply the 204 × 20 mm line where a broad-area source would waste light outside the target.
How the optical structure solves the inspection problem
Review the product-specific optical behavior, confirmed values and technical graphics together before selecting the final configuration.
- Adjustable brightness
- Halogen output can be adjusted and controlled for the target and exposure.
- Good colour rendering
- The source preserves visible colour differences needed for artwork and ceramic-pattern inspection.
- Concentrated high brightness
- The 204 × 20 mm emitting surface directs output into a narrow inspection field.
- Service-life characteristic
- The product-specific feature record describes a long service life when used within its thermal limits.
- High heat load
- The 110 W lamp produces substantial heat and requires a good heat-dissipation environment.
Select from the actual optical, mechanical and electrical requirement
Do not select a custom light from appearance alone. Confirm target, contrast, field, interfaces and load together.
- 1
Confirm colour-rendering need
Use the halogen source when material colour and surface tone are part of the inspection decision.
- 2
Fit the line field
Keep the inspected path inside the 204 × 20 mm emitting surface.
- 3
Size the thermal environment
Plan ventilation and heat clearance for the 110 W lamp before fixing the enclosure.
- 4
Validate brightness and exposure
Tune the adjustable output on the actual artwork, graphite or ceramic sample.
Read the product model pattern
LXV-LIN20449-WN- LXV
- Product prefix
- LIN
- Halogen line-scan-light family
- 20449
- 204 mm emitting length / 49 mm body-width code
- WN
- Halogen output suffix
LXV-LIN20449-WN model range
Values remain attached to their own model and are not transferred between designs.
| Model | Source type | Boundary | Emitting surface | Voltage | Power |
|---|---|---|---|---|---|
| LXV-LIN20449-WN | Halogen | L220 × W106 × H49 mm | 204 × 20 mm | 24 V | 110 W |
Release the exact product drawing with the complete inspection station
Dimensions, openings, mounting, channels and thermal clearances belong to the selected product only.
- 01
Reserve the complete 220 × 106 × 49 mm housing and keep the 204 × 20 mm emitting line unobstructed.
- 02
Align the line with the inspected path and maintain the 36 mm inner top reference shown in the end view.
- 03
Fasten the housing through the four M4 threaded holes with a maximum engagement depth of 6 mm.
- 04
Route the 500 mm lead and connector away from the hot housing, optical field and moving equipment.
- 05
Provide substantial ventilation and keep heat-sensitive materials clear of the 110 W source.
- 06
Provide 24 V / 110 W capacity, then validate brightness, colour rendering and temperature at production duty.
