High-intensity fibre illumination for compact bright-field and dark-field inspection
LXV-MHAB150-W couples a white LED light box to straight, ring or application-specific fibres. It supports endoscopic viewing, compact coaxial bright-field work and angled dark-field inspection where the illuminator must remain outside the camera envelope.
- Model
- LXV-MHAB150-W
- Single light-box configuration
- Illuminance
- Approx. 8,000,000 lx
- 8 mm beam at WD 20 mm
- Output power
- 150 W
- White output
- Boundary
- 299 × 120 × 116.7 mm
- Light-box envelope
- Fibre core
- Ø6–14 mm
- Application range
Electronic endoscopy
Deliver intense light through a small fibre bundle when the camera and objective must work inside a narrow inspection path.
Automotive endoscopes
Route illumination into cavities, castings and assemblies that cannot accept a conventional area light.
Industrial endoscopes
Keep the heat-producing light box outside the inspected cavity while the fibre carries light to the objective.
Bright- or dark-field fibre heads
Use the fibre geometry and field lens to choose on-axis surface response or low-angle defect contrast.
Dimming linearity, working-distance output and spectral response
The controller provides 256/1024-level constant-current adjustment. Delivered illuminance depends on fibre geometry and working distance, so production exposure must be checked with the selected fibre head.
| Parameter | Operating value |
|---|---|
| Input supply | AC 100–240 V, 50/60 Hz |
| Output channel | 1 channel |
| Drive mode | Constant current |
| Adjustment | Manual encoder or PC remote control |
| Adjustment levels | 256 / 1024 levels, switchable |
| Communication | RS232, 19,200 bps |
| External trigger | Pulse-width trigger, active-high 5–24 V |
| Maximum trigger frequency | 8 kHz at 50% duty cycle |
| Trigger response | 20 μs |
| Power-on response | ≤ 6 s |
| Protection | Overcurrent, temperature and power-off memory |
| Applicable fibre core | Ø6–14 mm |
| Operation | 0–40 °C; 20–85% RH, non-condensing |
| Storage | 0–50 °C; 20–85% RH, non-condensing |
Select one light box and the fibre geometry that reaches the inspection point
The light-box electrical configuration is fixed; the selectable optical result comes from the coupling connector, straight or ring fibre, fibre-core size and exit geometry.
- 1
Define the required field
Choose point, ring, line or other output geometry from the target and camera arrangement.
- 2
Match the coupling interface
Select MO, HY or SU connector geometry and confirm the Ø6–14 mm fibre-core range.
- 3
Route the fibre
Choose nominal length and preserve the assembly’s bend path without side-loading either connector.
- 4
Validate light delivery
Set the working distance and adjustment level on the real target before fixing exposure and trigger timing.
| Model | Output | Power | Boundary | Input | Trigger |
|---|---|---|---|---|---|
| LXV-MHAB150-W | White | 150 W | 299 × 120 × 116.7 mm | AC 100–240 V | 5–24 V |
| Model | Optical boundary | Length / coupling | Type |
|---|---|---|---|
| LXV-SLG-MO | Ø25–32 coupling body | 37 mm coupling section | M4 × 0.7 |
| LXV-SLG-HY | Ø25 coupling body | 20 mm coupling section | M4 × 0.7 |
| LXV-SLG-SU | Ø25 coupling body | 30 mm coupling section | M4 × 0.7 |
| LXV-MG6-110S | Ø6 output | 1100 / 2200 mm nominal length | Straight fibre |
| LXV-MG8-110S | Ø8 output | 1100 / 2200 mm nominal length | Straight fibre |
| LXV-MG10-110S | Ø10 output | 1100 / 2200 mm nominal length | Straight fibre |
| LXV-MRG31-100S | Ø31 ring | 1000 mm nominal length | Ring fibre |
| LXV-MRG48-100S | Ø48 ring | 1000 mm nominal length | Ring fibre |
| LXV-MRG61-100S | Ø61 ring | 1000 mm nominal length | Ring fibre |
| LXV-MRG97-1800S | Ø97 emitting ring | 1800 mm nominal length | 45° ring fibre |
Reserve the light-box envelope, interface faces and complete fibre route
Keep the front controls and optical outlet, rear AC/RS232/trigger interfaces and side ventilation accessible. The selected fibre assembly must reach the target without exceeding its permitted routing envelope.
