Ring and coaxial combined light for high-angle and on-axis fill
LXV-RNCOX combines a ring-light path with coaxial illumination in one 115 mm square assembly. The two directions provide inclined light and high-parallelism on-axis light for cap-print inspection.
- Model
- LXV-RNCOX8080-W
- Single verified design
- Boundary
- 115 × 115 × 140 mm
- Drawing dimensions
- Supply
- 24 V
- 8.7 W
- Optics
- Ring + coaxial
- Two directions
Bottle-cap printing
Reveal print defects on a circular reflective cap.
Mixed relief
Use oblique and axial response to separate height and surface detail.
Compact round targets
Centre the target under the combined optical path.
Reflective surfaces
Balance ring and coaxial contribution to control glare.
How the optical structure solves the inspection problem
Review the product-specific optical behavior, confirmed values and technical graphics together before selecting the final configuration.
- Ring path
- Adds inclined illumination for relief and edge response.
- Coaxial path
- Adds high-parallelism light along the camera axis.
- Combined result
- The two directions can reveal features hidden to one direction alone.
- Envelope
- The optical stack is taller than a conventional ring and needs 140 mm clearance.
Select from the actual optical, mechanical and electrical requirement
Do not select a custom light from appearance alone. Confirm target, contrast, field, interfaces and load together.
- 1
Confirm reflective target
Use when both axial and angled response are needed.
- 2
Check optical axis
Centre camera, light and cap.
- 3
Check height
Reserve the complete 140 mm assembly.
- 4
Tune and validate
Set contribution using the actual print defect.
Read the product model pattern
LXV-RNCOX8080-W- LXV
- Product prefix
- RNCOX
- Ring/coaxial combined family
- 8080
- Optical size class
- W
- White output
LXV-RNCOX8080-W model range
Values remain attached to their own model and are not transferred between designs.
| Model | Colour | Boundary dimension | Viewing aperture | Voltage | Power |
|---|---|---|---|---|---|
| LXV-RNCOX8080-W | White | L115 × W115 × H140 mm | 80 × 80 mm / Ø80 mm | 24 V | 8.7 W |
Release the exact product drawing with the complete inspection station
Dimensions, openings, mounting, channels and thermal clearances belong to the selected product only.
- 01
Reserve the complete 115 × 115 × 140 mm assembly and 80 mm viewing aperture.
- 02
Align the camera axis, Ø80 ring opening and 45° beam-splitter mirror.
- 03
Fasten through the four M4 threaded holes with a maximum engagement depth of 5 mm.
- 04
Keep the 500 mm lead and connector bend clear of the optical path.
- 05
Provide 24 V / 8.7 W capacity and validate ring-plus-coaxial balance on the printed cap.
