Small-angle high-luminance bar light for large panels, reflective surfaces and printed-character inspection
LXV-4BR uses a small-angle plug-in LED array and a precision-moulded aluminium housing to project concentrated linear illumination. The PDF documents 44 standard 24 V models across 16 mm and 30 mm emitting-width families, plus diffuser, polarizer, cable and mounting options for reflective or moving inspection targets.
- Standard models
- 44
- 17 × 16 mm · 20 × 30 mm · 7 special/long models
- Supply
- 24 V
- Every documented model row
- Power range
- 0.8–129.6 W
- Exact model and colour group dependent
- Optical reference
- LXV-4BR15030-W
- WD 0–150 mm · FOV 150 × 112 mm
- Application reference
- LXV-4BR17530-W × 2
- Plastic-bottle appearance-character inspection
Large LCD-panel defects
Use the concentrated linear field to preserve directional defect contrast across a large panel.
Metal-surface defects
Aim the small-angle output along the surface and validate diffuser or polarizer use against glare on the actual finish.
Printed-character defects
The documented two-light LXV-4BR17530-W arrangement produces obvious contrast for printed information on a plastic bottle.
Connector-pin flatness
Align the bar with the pin field so small height or edge changes form measurable contrast.
Long or combined fields
Select a standard length up to 1800 mm or confirm a customised multi-area/combined-light configuration for the required line.
Working-distance response, 150 × 112 mm field distribution and complete application evidence
The PDF identifies LXV-4BR15030-W for optical evidence and LXV-4BR17530-W for the bottle-character example. Charts, product construction, LED direction, emitting angle, installation and each application image are separated into complete visual objects; their surrounding explanations are rebuilt as native HTML.
LXV-4BR15030-W optical reference
Configurable construction and protected cable exit
Small-angle source, polar distribution and mounting
Plastic-bottle appearance-character inspection · LXV-4BR17530-W × 2
Reflective-workpiece optical options
- Optical model
- LXV-4BR15030-W
- Optical range
- WD 0–150 mm
- Field reference
- Dark / high luminance · FOV 150 × 112 mm · relative scale 10–100
- Application model
- LXV-4BR17530-W · 2 pieces
- Workpiece
- Plastic products
- Documented result
- Character-printing information extracted with obvious contrast
Select one exact length/width row, then match spectrum, optical treatment and controller load
Every standard model uses 24 V, but power, mass, mounting drawing and cable arrangement vary. Keep red power and green/blue/white power bound to the same model row, and use the correct drawing for short, standard, 600–1200 mm or 1800 mm housings.
- 1
Define the illuminated line
Record target length, required field width, working distance, motion direction and the smallest defect or character stroke.
- 2
Choose the exact housing family
Select 16 mm, 30 mm, 38 × 30 mm or a long model; preserve its model row, mass and drawing number together.
- 3
Choose colour and optical option
Test visible colour or a confirmed custom wavelength, then add diffuser or polarizer only when the real reflective surface requires it.
- 4
Size and validate the system
Match the selected power to a strobe, analog or digital controller and confirm exposure, thermal duty, field uniformity and acceptance criteria on production samples.
Read the product model pattern
LXV-4BR[length][width]-R/G/B/W/IR/UV- LXV
- Product prefix
- 4BR
- High-luminance small-angle bar-light family
- Length ##
- Length of emitting area
- Width ##
- Emitting width: 16 mm, 30 mm or the 38 × 30 mm special model
- R/G/B/W/IR/UV
- Colour or wavelength code
LXV-4BR model and optical selection tables
Each value remains attached to its own model or lens row.
16 mm emitting-width models
| Model | Supply | Power · R | Power · G/B/W | Weight | Outer / emitting length | Drawing | Common |
|---|---|---|---|---|---|---|---|
| LXV-4BR3016 | 24 V | 0.8 W | 1.1 W | 53 g | 42 / 30 mm | 1 | Y |
| LXV-4BR6016 | 24 V | 1.5 W | 2.2 W | 80 g | 72 / 60 mm | 1 | Y |
| LXV-4BR9016 | 24 V | 2.2 W | 3.3 W | 105 g | 102 / 90 mm | 1 | Y |
| LXV-4BR12016 | 24 V | 2.9 W | 4.4 W | 132 g | 132 / 120 mm | 1 | Y |
| LXV-4BR15016 | 24 V | 3.6 W | 5.4 W | 158 g | 162 / 150 mm | 1 | Y |
| LXV-4BR18016 | 24 V | 4.4 W | 6.5 W | 176 g | 192 / 180 mm | 1 | Y |
| LXV-4BR21016 | 24 V | 5.1 W | 7.6 W | 207 g | 222 / 210 mm | 1 | Y |
| LXV-4BR24016 | 24 V | 5.8 W | 8.7 W | 235 g | 252 / 240 mm | 1 | Y |
| LXV-4BR27016 | 24 V | 6.5 W | 9.8 W | 264 g | 282 / 270 mm | 1 | Y |
| LXV-4BR30016 | 24 V | 7.2 W | 10.8 W | 295 g | 312 / 300 mm | 1 | Y |
| LXV-4BR33016 | 24 V | 8.0 W | 11.9 W | 315 g | 342 / 330 mm | 1 | Y |
| LXV-4BR36016 | 24 V | 8.7 W | 13.0 W | 354 g | 372 / 360 mm | 1 | Y |
| LXV-4BR39016 | 24 V | 9.4 W | 14.1 W | 362 g | 402 / 390 mm | 1 | Y |
| LXV-4BR42016 | 24 V | 10.1 W | 15.2 W | 398 g | 432 / 420 mm | 1 | Y |
| LXV-4BR45016 | 24 V | 10.8 W | 16.2 W | 426 g | 462 / 450 mm | 1 | Y |
| LXV-4BR48016 | 24 V | 11.6 W | 17.3 W | 457 g | 492 / 480 mm | 1 | Y |
| LXV-4BR51016 | 24 V | 12.3 W | 18.4 W | 468 g | 522 / 510 mm | 1 | Y |
30 mm emitting-width models
| Model | Supply | Power · R | Power · G/B/W | Weight | Outer / emitting length | Drawing | Common |
|---|---|---|---|---|---|---|---|
| LXV-4BR2530 | 24 V | 1.1 W | 1.8 W | 69 g | 37 / 25 mm | 2 | Y |
| LXV-4BR5030 | 24 V | 2.2 W | 3.6 W | 103 g | 62 / 50 mm | 2 | Y |
| LXV-4BR7530 | 24 V | 3.3 W | 5.4 W | 134 g | 87 / 75 mm | 2 | Y |
| LXV-4BR10030 | 24 V | 4.4 W | 7.2 W | 166 g | 112 / 100 mm | 2 | Y |
| LXV-4BR12530 | 24 V | 5.4 W | 9.0 W | 200 g | 137 / 125 mm | 2 | Y |
| LXV-4BR15030 | 24 V | 6.5 W | 10.8 W | 229 g | 162 / 150 mm | 2 | Y |
| LXV-4BR17530 | 24 V | 7.6 W | 12.6 W | 262 g | 187 / 175 mm | 2 | Y |
| LXV-4BR20030 | 24 V | 8.7 W | 14.4 W | 292 g | 212 / 200 mm | 2 | Y |
| LXV-4BR22530 | 24 V | 9.8 W | 16.2 W | 322 g | 237 / 225 mm | 2 | Y |
| LXV-4BR25030 | 24 V | 10.8 W | 18.0 W | 372 g | 262 / 250 mm | 2 | Y |
| LXV-4BR27530 | 24 V | 11.9 W | 19.8 W | 406 g | 287 / 275 mm | 2 | Y |
| LXV-4BR30030 | 24 V | 13.0 W | 21.6 W | 446 g | 312 / 300 mm | 2 | Y |
| LXV-4BR32530 | 24 V | 14.1 W | 23.4 W | 471 g | 337 / 325 mm | 2 | Y |
| LXV-4BR35030 | 24 V | 15.2 W | 25.2 W | 509 g | 362 / 350 mm | 2 | Y |
| LXV-4BR37530 | 24 V | 16.2 W | 27.0 W | 528 g | 387 / 375 mm | 2 | Y |
| LXV-4BR40030 | 24 V | 17.3 W | 28.8 W | 578 g | 412 / 400 mm | 2 | Y |
| LXV-4BR42530 | 24 V | 18.4 W | 30.6 W | 609 g | 437 / 425 mm | 2 | Y |
| LXV-4BR45030 | 24 V | 19.5 W | 32.4 W | 646 g | 462 / 450 mm | 2 | Y |
| LXV-4BR47530 | 24 V | 20.6 W | 34.2 W | 689 g | 487 / 475 mm | 2 | Y |
| LXV-4BR50030 | 24 V | 21.6 W | 36.0 W | 728 g | 512 / 500 mm | 2 | Y |
Special and long models
| Model | Supply | Power · R | Power · G/B/W | Weight | Outer / emitting length | Drawing | Common |
|---|---|---|---|---|---|---|---|
| LXV-4BR3830 | 24 V | 1.5 W | 2.9 W | 84 g | 50 / 38 mm | 3 | N |
| LXV-4BR60030 | 24 V | 26.0 W | 43.2 W | 858 g | 612 / 600 mm | 4 | N |
| LXV-4BR80030 | 24 V | 34.6 W | 57.6 W | 1123 g | 812 / 800 mm | 5 | N |
| LXV-4BR90030 | 24 V | 38.9 W | 64.8 W | 1182 g | 912 / 900 mm | 6 | N |
| LXV-4BR100030 | 24 V | 43.2 W | 72.0 W | 1551 g | 1012 / 1000 mm | 7 | N |
| LXV-4BR120030 | 24 V | 51.9 W | 86.4 W | 1842 g | 1212 / 1200 mm | 8 | N |
| LXV-4BR180030 | 24 V | 77.8 W | 129.6 W | 2831 g | 1824 / 1800 mm | 9 | N |
Spectrum, options, environment and cables
| Item | PDF specification | Engineering use |
|---|---|---|
| Visible output | Red 620–630 nm · Green 525–530 nm · Blue 465–470 nm · White 6600 K | Keep colour and power from one exact model row |
| Custom wavelengths | UV and IR can be customised | Confirm wavelength, irradiance and safety before release |
| Controller types | Analog / digital / high-power controller | Match operating mode and connected load |
| Diffuser plate | Improves lamp shadow and glare on reflective workpieces | Validate the brightness trade-off on the real target |
| Polarizing plate | Use with polarized lens to remove dazzling light from uneven and reflective surfaces | Align and validate both polarizers in production geometry |
| Operating environment | 0–40 °C · 20–85% RH without condensation | Verify machine conditions and cooling |
| Reference life | 50,000 h when luminance is reduced to 50% of factory default | PDF reference condition, not a universal guarantee |
| PVC extension cable | Flexible, bend- and heat-resistant; intended inside equipment | Use for stationary in-equipment routing |
| High-flex extension cable | Harder and more abrasion-resistant; intended for drag-chain production lines | Use for repeated-motion routing |
Mechanical family rules
| Family | Section and emitting area | Length rule | Mounting / cable |
|---|---|---|---|
| LXV-4BR##16 | 16 mm emitting width · 22 mm outer height · 26 mm section | A = B + 12 mm | 2 × 2-M3 depth 5 · 500 mm lead |
| LXV-4BR##30 · 25–500 mm | 30 mm emitting width · 36 mm outer height · 26 mm section | A = B + 12 mm | 2 × 4-M3 depth 5 · 500 mm lead |
| LXV-4BR3830 | 38 × 30 mm emitting face · 50 mm outer length | Fixed special housing | 2 × 4-M3 depth 5 · 500 mm lead |
| LXV-4BR60030–120030 | 30 mm emitting width · 36 mm outer height · 26 mm section | Outer length = emitting length + 12 mm | Long models use the drawing-specific cable exit; 1200 mm uses two leads |
| LXV-4BR180030 | 30 mm emitting width · 36 mm outer height · 26 mm section | 1824 / 1800 mm | Two 500 mm leads and drawing-specific connectors |
Use the exact drawing for the selected housing and preserve fastener, connector, cable-bend and optical clearances
The PDF uses nine drawing groups because cable exits and connector arrangements change as length increases. Native tables expose the dimensional rules; the complete drawing objects below retain cross-sections, leads, mounting callouts and long-model arrangements without splitting a normal drawing across cards.
- 01
Choose one exact LXV-4BR row and keep its supply, two colour-power values, mass, drawing number and common/special status together.
- 02
Mount the bar using the documented frame/intrinsic holes and reserve access for M3 fasteners, connector removal and the stated 500 mm lead sections.
- 03
For 1200 mm and 1800 mm housings, reserve both cable exits and prevent the machine frame from loading or sharply bending either connector.
- 04
Aim the small-angle field at production working distance, then verify end-to-end uniformity, thermal duty, glare control and defect contrast on representative samples.
