Controller

LXV-CONTROLLER-GUIDE

Machine Vision Controller Selection Reference

Cross-series controller comparison covering model configurations, channel counts, communication, output, trigger support, power input, and controller operating modes.

Request Technical Quote →View technical sheets

Key Features

Compares constant-voltage, digital, constant-current, brighten-strobe, synchronous-control, and related controller configurations.
Includes controller operating-mode diagrams and adjustment-method references.
Retained as a cross-series selector so comparison data is not presented as the specification of one controller model.

Inspection fit

Choose the controller architecture from the light and timing requirement

The comparison separates constant-current, PWM digital, analog constant-voltage, alternate strobe, brightened strobe, dust-proof and synchronous-control families. It contains 91 documented configurations rather than one controller model.

Configurations: 91; Complete model rows
Channels: 1–12; Model dependent
Communication: Panel / RS232 / LAN; Series dependent
Trigger: 0–1.5 / 5–24 V; Where supported

Continuous intensity

Choose constant-current, analog or PWM according to the light electrical design.

High-speed strobe

Choose alternate or brightened strobe from the required pulse and synchronization.

Protected installation

Use dust-proof variants when the controller environment requires it.

System coordination

Use SHT where several controllers and cameras share one timing sequence.

Technical evidence

What changes between controller architectures

Electrical mode determines how the light is driven; communication and triggering determine how it participates in the machine cycle.

Constant voltage: Adjusts luminance by voltage while holding the set voltage; suited to line-scan and high-speed shutter cameras.
PWM digital: Adjusts duty ratio, shortens lighting time and heat, and supports 256-level key, encoder, RS232 or model-dependent LAN control.
Constant current: Adjusts LED current with current self-detection for line-scan and high-speed shutter cameras.
Brightened strobe: Applies 48 V for an instant, supports 0–999 μs lighting and can raise instantaneous luminance while limiting on-time.
Analog adjustment: Uses an external rotary knob for stepless 0–100% luminance adjustment.
Trigger versus brightened strobe: Trigger strobe is shown at up to 24 V with light pulse width following the trigger input; brightened strobe is shown at up to 48 V with a limited 0–999 μs pulse.
Synchronous logic: Coordinates controller and camera triggers through countdown, I/O-port and signal-generator modes rather than powering the light directly.

Architecture comparison

Series-level selection matrix

Mode	Series	Channels	Communication	Electrical range	Use when
Constant current	LXV-3ACC	1–4 channels	RS232 / RS232+LAN	0–2500 mA	Choose where LED current, rather than voltage, defines the load.
Constant current	LXV-3DPA	1–4 channels	RS232 + LAN	40–1350 W per channel	Covers small, medium and high-power constant-current loads.
PWM digital	LXV-3DPC	2–12 channels	RS232 / RS232+LAN	24 V, 40–60 W per channel	Use for multi-channel constant-voltage PWM control.
Analog constant voltage	LXV-3APC	2–4 channels	Panel / external trigger	24 V	Use for manual analog intensity control.
Compact analog	LXV-2APC / APC	1–2 channels	Panel / trigger	24 V	Use for compact low-channel installations.
Alternate strobe	LXV-3DRC	2–4 channels	RS232 + LAN	24 / 48 V	Use time-sharing or independent line-scan triggering.
Brightened strobe	LXV-4STU	2–4 channels	RS232 + LAN	48 V	Use short 2–10× brightened pulses with camera synchronization.
Dust-proof	LXV-IP	1 or 8 channels	Model dependent	24 V	Use sealed controller variants for dusty installations.
Synchronous logic	LXV-SHT	6 outputs	RS232 + LAN	Logic outputs	Coordinate multiple controllers and cameras.

Model selection

Move from architecture to one exact controller row

The comparison narrows the family; retain the exact row for voltage or current, per-output limit, total load, channels, communication, trigger and supply.

1
Identify the light drive
Confirm constant current or constant voltage, output voltage, total load and maximum channel load.
2
Define control timing
Set continuous, PWM, alternating or brightened strobe operation.
3
Count channels and devices
Include every independently controlled light and camera trigger.
4
Choose communication and environment
Confirm panel, RS232, LAN, trigger voltage and protection needs.

Complete controller index

91 documented controller configurations

Every electrical and timing value remains attached to its own model row.

Mode	Series	Model	Channels	Communication	Output / current	Per-output / timing	Total output	Trigger	Input supply
Constant voltage	Alternate strobe	LXV-3DRC24250-2N	2	RS232 / LAN	24 V	250 W	250 W	Y · 5–24 V	AC 100–240 V
Constant voltage	Alternate strobe	LXV-3DRC24250-4N	4	RS232 / LAN	24 V	250 W	250 W	Y · 5–24 V	AC 100–240 V
Constant voltage	Alternate strobe	LXV-3DRC48400-2N	2	RS232 / LAN	48 V	400 W	400 W	Y · 5–24 V	AC 100–240 V
Constant voltage	Alternate strobe	LXV-3DRC48400-4N	4	RS232 / LAN	48 V	400 W	400 W	Y · 5–24 V	AC 100–240 V
Constant voltage	Alternate strobe	LXV-3DRC481000-2N	2	RS232 / LAN	48 V	1000 W	2000 W	Y · 5–24 V	AC 100–240 V
Constant voltage	APC controller box	LXV-APC2424-2F	2	—	24 V	24 W	48 W	Y · 0–1.5 V	DC 24 V
Constant voltage	APC controller box	LXV-3APC2460-2F	2	—	24 V	30 W	60 W	Y · 0–1.5 V	DC 24 V
Constant voltage	3APC small power	LXV-3APC2424-1	1	—	24 V	24 W	24 W	Y · 5–24 V	AC 100–240 V
Constant voltage	3APC small power	LXV-3APC2424-2	2	—	24 V	24 W	24 W	Y · 5–24 V	AC 100–240 V
Constant voltage	3APC small power	LXV-3APC2424-4	4	—	24 V	24 W	24 W	Y · 5–24 V	AC 100–240 V
Constant voltage	3APC small power	LXV-3APC2460-1	1	—	24 V	60 W	60 W	Y · 5–24 V	AC 100–240 V
Constant voltage	3APC small power	LXV-3APC2460-2	2	—	24 V	30 W	60 W	Y · 5–24 V	AC 100–240 V
Constant voltage	3APC small power	LXV-3APC2460-4	4	—	24 V	24 W	60 W	Y · 5–24 V	AC 100–240 V
Constant voltage	3APC medium power	LXV-3APC24120-1	1	—	24 V	120 W	120 W	Y · 5–24 V	AC 100–240 V
Constant voltage	3APC medium power	LXV-3APC24120-2	2	—	24 V	90 W	120 W	Y · 5–24 V	AC 100–240 V
Constant voltage	3APC medium power	LXV-3APC24120-4	4	—	24 V	60 W	120 W	Y · 5–24 V	AC 100–240 V
Constant voltage	3APC medium power	LXV-3APC24200-1	1	—	24 V	180 W	180 W	Y · 5–24 V	AC 100–240 V
Constant voltage	3APC medium power	LXV-3APC24200-2	2	—	24 V	90 W	180 W	Y · 5–24 V	AC 100–240 V
Constant voltage	3APC medium power	LXV-3APC24200-4	4	—	24 V	60 W	180 W	Y · 5–24 V	AC 100–240 V
Constant voltage	2APC small power	LXV-2APC2424-1	1	—	24 V	24 W	24 W	Y · 0–1.5 V	AC 100–240 V
Constant voltage	2APC small power	LXV-2APC2424-2	2	—	24 V	24 W	24 W	Y · 0–1.5 V	AC 100–240 V
Constant voltage	2APC small power	LXV-2APC2424-4	4	—	24 V	24 W	24 W	Y · 0–1.5 V	AC 100–240 V
Constant voltage	2APC medium power	LXV-2APC2460-1	1	—	24 V	60 W	60 W	Y · 0–1.5 V	AC 100–240 V
Constant voltage	2APC medium power	LXV-2APC2460-2	2	—	24 V	30 W	60 W	Y · 0–1.5 V	AC 100–240 V
Constant voltage	2APC medium power	LXV-2APC2460-4	4	—	24 V	24 W	60 W	Y · 0–1.5 V	AC 100–240 V
Constant voltage	2APC medium power	LXV-2APC2460-6	6	—	24 V	24 W	60 W	Y · 0–1.5 V	AC 100–240 V
Constant voltage	2APC medium power	LXV-2APC24120-1	1	—	24 V	120 W	120 W	Y · 5–24 V	AC 100–240 V
Constant voltage	2APC medium power	LXV-2APC24120-2	2	—	24 V	60 W	120 W	Y · 5–24 V	AC 100–240 V
Constant voltage	2APC medium power	LXV-2APC24120-8	8	—	24 V	24 W	120 W	Y · 0–1.5 V	AC 100–240 V
Constant voltage	2APC high power	LXV-2APC24200-1	1	—	24 V	180 W	180 W	Y · 5–24 V	AC 100–240 V
Constant voltage	2APC high power	LXV-2APC24400-1	1	—	24 V	360 W	360 W	Y · 5–24 V	AC 200–240 V
Constant voltage	2APC high power	LXV-2APC24400-2	2	—	24 V	180 W	360 W	Y · 5–24 V	AC 200–240 V
Constant voltage	2APC high power	LXV-2APC481000-1	1	—	48 V	1000 W	1000 W	Y · 5–24 V	AC 90–264 V
Constant voltage	2APC high power	LXV-2APC481500-1	1	—	48 V	1500 W	1500 W	Y · 5–24 V	AC 90–264 V
Brightened strobe	4STU brightened strobe	LXV-4STU4860-2N	2	RS232 / LAN	48 V	0–999 μs	—	Y · 5–24 V	AC 100–240 V
Brightened strobe	4STU brightened strobe	LXV-4STU4860-4N	4	RS232 / LAN	48 V	0–999 μs	—	Y · 5–24 V	AC 100–240 V
Brightened strobe	4STU brightened strobe	LXV-4STU48120-2N	2	RS232 / LAN	48 V	0–999 μs	—	Y · 5–24 V	AC 100–240 V
Brightened strobe	4STU brightened strobe	LXV-4STU48120-4N	4	RS232 / LAN	48 V	0–999 μs	—	Y · 5–24 V	AC 100–240 V
Brightened strobe	4STU brightened strobe	LXV-4STU48200-2N	2	RS232 / LAN	48 V	0–999 μs	—	Y · 5–24 V	AC 100–240 V
Brightened strobe	4STU brightened strobe	LXV-4STU48200-4N	4	RS232 / LAN	48 V	0–999 μs	—	Y · 5–24 V	AC 100–240 V
Brightened strobe	4STU brightened strobe	LXV-4STU48120-4P	4	RS232 / LAN	48 V	0–100 μs	—	Y · 5–24 V	AC 100–240 V
Brightened strobe	4STU brightened strobe	LXV-4STU48200-2P	2	RS232 / LAN	48 V	0–100 μs	—	Y · 5–24 V	AC 100–240 V
Brightened strobe	4STU brightened strobe	LXV-4STU48200-4P	4	RS232 / LAN	48 V	0–100 μs	—	Y · 5–24 V	AC 100–240 V
Constant current	3ACC constant current	LXV-3ACC350-2C	2	RS232	0–350 mA	1 W	2 W	Y · 5–24 V	AC 100–240 V
Constant current	3ACC constant current	LXV-3ACC350-4C	4	RS232	0–350 mA	1 W	4 W	Y · 5–24 V	AC 100–240 V
Constant current	3ACC constant current	LXV-3ACC700-2C	2	RS232	0–700 mA	2 W	4 W	Y · 5–24 V	AC 100–240 V
Constant current	3ACC constant current	LXV-3ACC700-4C	4	RS232	0–700 mA	2 W	8 W	Y · 5–24 V	AC 100–240 V
Constant current	3ACC constant current	LXV-3ACC1000-2C	2	RS232	0–1000 mA	3 W	6 W	Y · 5–24 V	AC 100–240 V
Constant current	3ACC constant current	LXV-3ACC1000-4C	4	RS232	0–1000 mA	3 W	12 W	Y · 5–24 V	AC 100–240 V
Constant current	3ACC constant current	LXV-3ACC1500-2C	2	RS232	0–1500 mA	5 W	10 W	Y · 5–24 V	AC 100–240 V
Constant current	3ACC constant current	LXV-3ACC1500-4C	4	RS232	0–1500 mA	5 W	20 W	Y · 5–24 V	AC 100–240 V
Constant current	3ACC constant current	LXV-3ACC2500-2C	2	RS232	0–2500 mA	10 W	20 W	Y · 5–24 V	AC 100–240 V
Constant current	3ACC constant current	LXV-3ACC12400-2	2	RS232 / LAN	0–400 mA	5 W	10 W	Y · 5–24 V	AC 100–240 V
Constant current	3ACC constant current	LXV-3ACC12700-1	1	RS232 / LAN	0–700 mA	8.5 W	8.5 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA small power	LXV-3DPA2460-2S	2	RS232 / LAN	—	40 W	60 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA small power	LXV-3DPA2460-4S	4	RS232 / LAN	—	40 W	60 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA medium power	LXV-3DPA24120-1M	1	RS232 / LAN	—	120 W	120 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA medium power	LXV-3DPA24120-2M	2	RS232 / LAN	—	120 W	120 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA medium power	LXV-3DPA24200-1M	1	RS232 / LAN	—	200 W	200 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA medium power	LXV-3DPA24200-2M	2	RS232 / LAN	—	120 W	200 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA high power	LXV-3DPA24320-1S	1	RS232 / LAN	—	320 W	320 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA high power	LXV-3DPA24320-2S	2	RS232 / LAN	—	240 W	320 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA high power	LXV-3DPA24500-1S	1	RS232 / LAN	—	450 W	450 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA high power	LXV-3DPA24500-2S	2	RS232 / LAN	—	240 W	450 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA high power	LXV-3DPA24500-4S	4	RS232 / LAN	—	120 W	450 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA high power	LXV-3DPA48750-1S	1	RS232 / LAN	—	700 W	700 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA high power	LXV-3DPA481000-1S	1	RS232 / LAN	—	900 W	900 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA high power	LXV-3DPA481500-1S	1	RS232 / LAN	—	1350 W	1350 W	Y · 5–24 V	AC 100–240 V
Constant current	3DPA high power	LXV-3DPA24350-1SA	1	RS232 / LAN	—	320 W	320 W	Y · 5–24 V	AC 100–240 V · switch
Constant current	3DPA high power	LXV-3DPA24350-2SA	2	RS232 / LAN	—	240 W	320 W	Y · 5–24 V	AC 100–240 V · switch
Constant current	3DPA high power	LXV-3DPA481000-1SA	1	RS232 / LAN	—	900 W	900 W	Y · 5–24 V	110 / 220 VAC · switch
Constant current	3DPA high power	LXV-3DPA481500-1SA	1	RS232 / LAN	—	1350 W	1350 W	Y · 5–24 V	AC 180–264 V
PWM digital	3DPC controller box	LXV-3DPC2480-4F	4	RS232	24 V	80 W	80 W	Y · 5–24 V	DC 24 V
PWM digital	3DPC medium power	LXV-3DPC2460-2C	2	RS232	24 V	40 W	60 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC medium power	LXV-3DPC2460-4C	4	RS232	24 V	40 W	60 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC high power	LXV-3DPC24120-4C	4	RS232	24 V	60 W	120 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC high power	LXV-3DPC24120-8C	8	RS232	24 V	60 W	120 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC high power	LXV-3DPC24200-4C	4	RS232	24 V	60 W	200 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC high power	LXV-3DPC24200-8C	8	RS232	24 V	60 W	200 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC medium power	LXV-3DPC2460-2S	2	RS232 / LAN	24 V	40 W	60 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC medium power	LXV-3DPC2460-4S	4	RS232 / LAN	24 V	40 W	60 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC high power	LXV-3DPC24120-4S	4	RS232 / LAN	24 V	60 W	120 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC high power	LXV-3DPC24120-8S	8	RS232 / LAN	24 V	60 W	120 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC high power	LXV-3DPC24200-4S	4	RS232 / LAN	24 V	60 W	200 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC high power	LXV-3DPC24200-8S	8	RS232 / LAN	24 V	60 W	200 W	Y · 5–24 V	AC 100–240 V
PWM digital	3DPC high power	LXV-3DPC24200-12S	12	RS232 / LAN	24 V	60 W	200 W	Y · 5–24 V	AC 100–240 V
Synchronous logic	SHT synchronous control module	LXV-SHT2430-1	6	RS232 / LAN	Logic output	1–999 μs / 1–999 ms	1–100 kHz · 0–100% duty	Y · 5–24 V	DC 24 V
IP dust-proof	IP dust-proof controller	LXV-3DPC24120-8S-IP	8	RS232 / LAN	24 V	60 W	120 W	Y · 5–24 V	AC 100–240 V
IP dust-proof	IP dust-proof controller	LXV-3DPC24200-8S-IP	8	RS232 / LAN	24 V	60 W	200 W	Y · 5–24 V	AC 100–240 V
IP dust-proof	IP dust-proof controller	LXV-APC24240-1-IP	1	—	24 V	240 W	240 W	—	AC 100–240 V
IP dust-proof	IP dust-proof controller	LXV-APC24480-1-IP	1	—	24 V	480 W	480 W	—	AC 100–240 V

Constant currentLXV-3ACCOpen complete product data →Constant currentLXV-3DPAOpen complete product data →PWM digitalLXV-3DPCOpen complete product data →Analog constant voltageLXV-3APCOpen complete product data →Compact analogLXV-2APC / APCOpen complete product data →Alternate strobeLXV-3DRCOpen complete product data →Brightened strobeLXV-4STUOpen complete product data →Dust-proofLXV-IPOpen complete product data →Synchronous logicLXV-SHTOpen complete product data →

PRODUCT FAQ

Questions to confirm before choosing LXV-CONTROLLER-GUIDE

What is LXV-CONTROLLER-GUIDE used for?

LXV-CONTROLLER-GUIDE is a Controller option for machine vision inspection projects where the optical setup needs to be matched to the part, defect, camera, lens, working distance, and production constraints.

How can I discuss whether LXV-CONTROLLER-GUIDE fits my inspection task?

Check the specification table, compare the feature and application notes, then share sample images, drawings, field of view, working distance, exposure, trigger mode, and speed requirements for model selection support.

Can LXV-CONTROLLER-GUIDE be quoted or configured for a specific project?

Use the enquiry form with the model code and project constraints. Dimensions, wavelength, cabling, mounting, controller mode, and related accessories can be confirmed against the real inspection condition.

DIRECT ENQUIRY

Get a Customized Quotation

Need specific dimensions, custom wavelength LED combinations, or special cabling? Our optical engineering and sales offices are ready to assist.

Sales contact

Response path: Include the inspection constraints with your enquiry

Sample Testing Support

Share target workpiece samples, drawings, and imaging requirements so the lighting setup can be discussed against real inspection constraints.

Engineering Inquiry & Selection Support

Select your request type below. Our optical engineering and sales team replies directly with technical feedback, quotation, or sample loan procedures.

All inspection requirements, target drawings, and sample test images remain strictly confidential.

Full Name

Corporate Email

Company / Institution

How did you first hear about LuxMV? (optional)

Message / Requirements

Request 3D STEP ModelDiscuss Evaluation Options

Add technical context (optional, helps speed evaluation)

Inspection target, defect, or applicationPart material and surface conditionCamera, lens, field of view, and working distanceLine speed, exposure, trigger, and mounting limits

For drawings or sample images, please include a secure download link or email them after receiving your inquiry reference. Secure file upload will be added only after private storage and malware scanning are in place.

Zero-Risk Optical Evaluation: Free sample loan & laboratory lighting report with your actual workpieces. Strict NDA protection.

Protected by reCAPTCHA. Google Privacy Policy and Terms of Service apply.

Related Products

Loading product details

Mode

Series

Channels

Communication

Electrical range

Use when

Constant current

LXV-3ACC

1–4 channels

RS232 / RS232+LAN

0–2500 mA

Choose where LED current, rather than voltage, defines the load.

Constant current

LXV-3DPA

1–4 channels

RS232 + LAN

40–1350 W per channel

Covers small, medium and high-power constant-current loads.

PWM digital

LXV-3DPC

2–12 channels

RS232 / RS232+LAN

24 V, 40–60 W per channel

Use for multi-channel constant-voltage PWM control.

Analog constant voltage

LXV-3APC

2–4 channels

Panel / external trigger

24 V

Use for manual analog intensity control.

Compact analog

LXV-2APC / APC

1–2 channels

Panel / trigger

24 V

Use for compact low-channel installations.

Alternate strobe

LXV-3DRC

2–4 channels

RS232 + LAN

24 / 48 V

Use time-sharing or independent line-scan triggering.

Brightened strobe

LXV-4STU

2–4 channels

RS232 + LAN

48 V

Use short 2–10× brightened pulses with camera synchronization.

Dust-proof

LXV-IP

1 or 8 channels

Model dependent

24 V

Use sealed controller variants for dusty installations.

Synchronous logic

LXV-SHT

6 outputs

RS232 + LAN

Logic outputs

Coordinate multiple controllers and cameras.

Mode

Series

Model

Channels

Communication

Output / current

Per-output / timing

Total output

Trigger

Input supply

Constant voltage

Alternate strobe

LXV-3DRC24250-2N

RS232 / LAN

24 V

250 W

Y · 5–24 V

AC 100–240 V

Constant voltage

Alternate strobe

LXV-3DRC24250-4N

RS232 / LAN

24 V

250 W

Y · 5–24 V

AC 100–240 V

Constant voltage

Alternate strobe

LXV-3DRC48400-2N

RS232 / LAN

48 V

400 W

Y · 5–24 V

AC 100–240 V

Constant voltage

Alternate strobe

LXV-3DRC48400-4N

RS232 / LAN

48 V

400 W

Y · 5–24 V

AC 100–240 V

Constant voltage

Alternate strobe

LXV-3DRC481000-2N

RS232 / LAN

48 V

1000 W

2000 W

Y · 5–24 V

AC 100–240 V

Constant voltage

APC controller box

LXV-APC2424-2F

—

24 V

24 W

48 W

Y · 0–1.5 V

DC 24 V

Constant voltage

APC controller box

LXV-3APC2460-2F

—

24 V

30 W

60 W

Y · 0–1.5 V

DC 24 V

Constant voltage

3APC small power

LXV-3APC2424-1

—

24 V

24 W

Y · 5–24 V

AC 100–240 V

Constant voltage

3APC small power

LXV-3APC2424-2

—

24 V

24 W

Y · 5–24 V

AC 100–240 V

Constant voltage

3APC small power

LXV-3APC2424-4

—

24 V

24 W

Y · 5–24 V

AC 100–240 V

Constant voltage

3APC small power

LXV-3APC2460-1

—

24 V

60 W

Y · 5–24 V

AC 100–240 V

Constant voltage

3APC small power

LXV-3APC2460-2

—

24 V

30 W

60 W

Y · 5–24 V

AC 100–240 V

Constant voltage

3APC small power

LXV-3APC2460-4

—

24 V

24 W

60 W

Y · 5–24 V

AC 100–240 V

Constant voltage

3APC medium power

LXV-3APC24120-1

—

24 V

120 W

Y · 5–24 V

AC 100–240 V

Constant voltage

3APC medium power

LXV-3APC24120-2

—

24 V

90 W

120 W

Y · 5–24 V

AC 100–240 V

Constant voltage

3APC medium power

LXV-3APC24120-4

—

24 V

60 W

120 W

Y · 5–24 V

AC 100–240 V

Constant voltage

3APC medium power

LXV-3APC24200-1

—

24 V

180 W

Y · 5–24 V

AC 100–240 V

Constant voltage

3APC medium power

LXV-3APC24200-2

—

24 V

90 W

180 W

Y · 5–24 V

AC 100–240 V

Constant voltage

3APC medium power

LXV-3APC24200-4

—

24 V

60 W

180 W

Y · 5–24 V

AC 100–240 V

Constant voltage

2APC small power

LXV-2APC2424-1

—

24 V

24 W

Y · 0–1.5 V

AC 100–240 V

Constant voltage

2APC small power

LXV-2APC2424-2

—

24 V

24 W

Y · 0–1.5 V

AC 100–240 V

Constant voltage

2APC small power

LXV-2APC2424-4

—

24 V

24 W

Y · 0–1.5 V

AC 100–240 V

Constant voltage

2APC medium power

LXV-2APC2460-1

—

24 V

60 W

Y · 0–1.5 V

AC 100–240 V

Constant voltage

2APC medium power

LXV-2APC2460-2

—

24 V

30 W

60 W

Y · 0–1.5 V

AC 100–240 V

Constant voltage

2APC medium power

LXV-2APC2460-4

—

24 V

24 W

60 W

Y · 0–1.5 V

AC 100–240 V

Constant voltage

2APC medium power

LXV-2APC2460-6

—

24 V

24 W

60 W

Y · 0–1.5 V

AC 100–240 V

Constant voltage

2APC medium power

LXV-2APC24120-1

—

24 V

120 W

Y · 5–24 V

AC 100–240 V

Constant voltage

2APC medium power

LXV-2APC24120-2

—

24 V

60 W

120 W

Y · 5–24 V

AC 100–240 V

Constant voltage

2APC medium power

LXV-2APC24120-8

—

24 V

24 W

120 W

Y · 0–1.5 V

AC 100–240 V

Constant voltage

2APC high power

LXV-2APC24200-1

—

24 V

180 W

Y · 5–24 V

AC 100–240 V

Constant voltage

2APC high power

LXV-2APC24400-1

—

24 V

360 W

Y · 5–24 V

AC 200–240 V

Constant voltage

2APC high power

LXV-2APC24400-2

—

24 V

180 W

360 W

Y · 5–24 V

AC 200–240 V

Constant voltage

2APC high power

LXV-2APC481000-1

—

48 V

1000 W

Y · 5–24 V

AC 90–264 V

Constant voltage

2APC high power

LXV-2APC481500-1

—

48 V

1500 W

Y · 5–24 V

AC 90–264 V

Brightened strobe

4STU brightened strobe

LXV-4STU4860-2N

RS232 / LAN

48 V

0–999 μs

—

Y · 5–24 V

AC 100–240 V

Brightened strobe

4STU brightened strobe

LXV-4STU4860-4N

RS232 / LAN

48 V

0–999 μs

—

Y · 5–24 V

AC 100–240 V

Brightened strobe

4STU brightened strobe

LXV-4STU48120-2N

RS232 / LAN

48 V

0–999 μs

—

Y · 5–24 V

AC 100–240 V

Brightened strobe

4STU brightened strobe

LXV-4STU48120-4N

RS232 / LAN

48 V

0–999 μs

—

Y · 5–24 V

AC 100–240 V

Brightened strobe

4STU brightened strobe

LXV-4STU48200-2N

RS232 / LAN

48 V

0–999 μs

—

Y · 5–24 V

AC 100–240 V

Brightened strobe

4STU brightened strobe

LXV-4STU48200-4N

RS232 / LAN

48 V

0–999 μs

—

Y · 5–24 V

AC 100–240 V

Brightened strobe

4STU brightened strobe

LXV-4STU48120-4P

RS232 / LAN

48 V

0–100 μs

—

Y · 5–24 V

AC 100–240 V

Brightened strobe

4STU brightened strobe

LXV-4STU48200-2P

RS232 / LAN

48 V

0–100 μs

—

Y · 5–24 V

AC 100–240 V

Brightened strobe

4STU brightened strobe

LXV-4STU48200-4P

RS232 / LAN

48 V

0–100 μs

—

Y · 5–24 V

AC 100–240 V

Constant current

3ACC constant current

LXV-3ACC350-2C

RS232

0–350 mA

1 W

2 W

Y · 5–24 V

AC 100–240 V

Constant current

3ACC constant current

LXV-3ACC350-4C

RS232

0–350 mA

1 W

4 W

Y · 5–24 V

AC 100–240 V

Constant current

3ACC constant current

LXV-3ACC700-2C

RS232

0–700 mA

2 W

4 W

Y · 5–24 V

AC 100–240 V

Constant current

3ACC constant current

LXV-3ACC700-4C

RS232

0–700 mA

2 W

8 W

Y · 5–24 V

AC 100–240 V

Constant current

3ACC constant current

LXV-3ACC1000-2C

RS232

0–1000 mA

3 W

6 W

Y · 5–24 V

AC 100–240 V

Constant current

3ACC constant current

LXV-3ACC1000-4C

RS232

0–1000 mA

3 W

12 W

Y · 5–24 V

AC 100–240 V

Constant current

3ACC constant current

LXV-3ACC1500-2C

RS232

0–1500 mA

5 W

10 W

Y · 5–24 V

AC 100–240 V

Constant current

3ACC constant current

LXV-3ACC1500-4C

RS232

0–1500 mA

5 W

20 W

Y · 5–24 V

AC 100–240 V

Constant current

3ACC constant current

LXV-3ACC2500-2C

RS232

0–2500 mA

10 W

20 W

Y · 5–24 V

AC 100–240 V

Constant current

3ACC constant current

LXV-3ACC12400-2

RS232 / LAN

0–400 mA

5 W

10 W

Y · 5–24 V

AC 100–240 V

Constant current

3ACC constant current

LXV-3ACC12700-1

RS232 / LAN

0–700 mA

8.5 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA small power

LXV-3DPA2460-2S

RS232 / LAN

—

40 W

60 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA small power

LXV-3DPA2460-4S

RS232 / LAN

—

40 W

60 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA medium power

LXV-3DPA24120-1M

RS232 / LAN

—

120 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA medium power

LXV-3DPA24120-2M

RS232 / LAN

—

120 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA medium power

LXV-3DPA24200-1M

RS232 / LAN

—

200 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA medium power

LXV-3DPA24200-2M

RS232 / LAN

—

120 W

200 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA high power

LXV-3DPA24320-1S

RS232 / LAN

—

320 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA high power

LXV-3DPA24320-2S

RS232 / LAN

—

240 W

320 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA high power

LXV-3DPA24500-1S

RS232 / LAN

—

450 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA high power

LXV-3DPA24500-2S

RS232 / LAN

—

240 W

450 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA high power

LXV-3DPA24500-4S

RS232 / LAN

—

120 W

450 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA high power

LXV-3DPA48750-1S

RS232 / LAN

—

700 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA high power

LXV-3DPA481000-1S

RS232 / LAN

—

900 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA high power

LXV-3DPA481500-1S

RS232 / LAN

—

1350 W

Y · 5–24 V

AC 100–240 V

Constant current

3DPA high power

LXV-3DPA24350-1SA

RS232 / LAN

—

320 W

Y · 5–24 V

AC 100–240 V · switch

Constant current

3DPA high power

LXV-3DPA24350-2SA

RS232 / LAN

—

240 W

320 W

Y · 5–24 V

AC 100–240 V · switch

Constant current

3DPA high power

LXV-3DPA481000-1SA

RS232 / LAN

—

900 W

Y · 5–24 V

110 / 220 VAC · switch

Constant current

3DPA high power

LXV-3DPA481500-1SA

RS232 / LAN

—

1350 W

Y · 5–24 V

AC 180–264 V

PWM digital

3DPC controller box

LXV-3DPC2480-4F

RS232

24 V

80 W

Y · 5–24 V

DC 24 V

PWM digital

3DPC medium power

LXV-3DPC2460-2C

RS232

24 V

40 W

60 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC medium power

LXV-3DPC2460-4C

RS232

24 V

40 W

60 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC high power

LXV-3DPC24120-4C

RS232

24 V

60 W

120 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC high power

LXV-3DPC24120-8C

RS232

24 V

60 W

120 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC high power

LXV-3DPC24200-4C

RS232

24 V

60 W

200 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC high power

LXV-3DPC24200-8C

RS232

24 V

60 W

200 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC medium power

LXV-3DPC2460-2S

RS232 / LAN

24 V

40 W

60 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC medium power

LXV-3DPC2460-4S

RS232 / LAN

24 V

40 W

60 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC high power

LXV-3DPC24120-4S

RS232 / LAN

24 V

60 W

120 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC high power

LXV-3DPC24120-8S

RS232 / LAN

24 V

60 W

120 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC high power

LXV-3DPC24200-4S

RS232 / LAN

24 V

60 W

200 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC high power

LXV-3DPC24200-8S

RS232 / LAN

24 V

60 W

200 W

Y · 5–24 V

AC 100–240 V

PWM digital

3DPC high power

LXV-3DPC24200-12S

RS232 / LAN

24 V

60 W

200 W

Y · 5–24 V

AC 100–240 V

Synchronous logic

SHT synchronous control module

LXV-SHT2430-1

RS232 / LAN

Logic output

1–999 μs / 1–999 ms

1–100 kHz · 0–100% duty

Y · 5–24 V

DC 24 V

IP dust-proof

IP dust-proof controller

LXV-3DPC24120-8S-IP

RS232 / LAN

24 V

60 W

120 W

Y · 5–24 V

AC 100–240 V

IP dust-proof

IP dust-proof controller

LXV-3DPC24200-8S-IP

RS232 / LAN

24 V

60 W

200 W

Y · 5–24 V

AC 100–240 V

IP dust-proof

IP dust-proof controller

LXV-APC24240-1-IP

—

24 V

240 W

—

AC 100–240 V

IP dust-proof

IP dust-proof controller

LXV-APC24480-1-IP

—

24 V

480 W

—

AC 100–240 V

Questions to confirm before choosing LXV-CONTROLLER-GUIDE

Choose the controller architecture from the light and timing requirement

Continuous intensity

High-speed strobe

Protected installation

System coordination

What changes between controller architectures

Move from architecture to one exact controller row

Identify the light drive

Define control timing

Count channels and devices

Choose communication and environment

Use dimensions and wiring from the selected controller only

Questions to confirm before choosing LXV-CONTROLLER-GUIDE

What is LXV-CONTROLLER-GUIDE used for?

How can I discuss whether LXV-CONTROLLER-GUIDE fits my inspection task?

Can LXV-CONTROLLER-GUIDE be quoted or configured for a specific project?

Get a Customized Quotation

Sample Testing Support

Engineering Inquiry & Selection Support

Related Products

2APC Analog Controller Machine Vision Light

3ACC Constant Current Controller Led Japan

3APC Analog Controller

3DPA High Power Constant Current Controller Led Japan

Choose the controller architecture from the light and timing requirement

Continuous intensity

High-speed strobe

Protected installation

System coordination

What changes between controller architectures

Move from architecture to one exact controller row

Identify the light drive

Define control timing

Count channels and devices

Choose communication and environment

Use dimensions and wiring from the selected controller only

Questions to confirm before choosing LXV-CONTROLLER-GUIDE

What is LXV-CONTROLLER-GUIDE used for?

How can I discuss whether LXV-CONTROLLER-GUIDE fits my inspection task?

Can LXV-CONTROLLER-GUIDE be quoted or configured for a specific project?

Get a Customized Quotation

Sample Testing Support

Engineering Inquiry & Selection Support

Related Products

2APC Analog Controller Machine Vision Light

3ACC Constant Current Controller Led Japan

3APC Analog Controller

3DPA High Power Constant Current Controller Led Japan