Compact air-cooled coaxial line-scan light for constrained spaces
LXV-COXL50-R combines a compact coaxial line-scan structure with compressor-air cooling. The 38 × 25 mm emitting aperture provides high-brightness red illumination with good uniformity and consistency inside an 86 × 50 × 36 mm body.
- Model
- LXV-COXL50-R
- Single verified design
- Emitting aperture
- 38 × 25 mm
- Compact coaxial field
- Supply
- 24 V
- 8.4 W
- Cooling
- Compressor air
- Two air connections
Glass surface defects
Use axial red illumination to reveal surface variation on reflective glass.
Plastic-shell scratches
Inspect scratches on air-conditioning-panel and other moulded plastic surfaces.
PCB inspection
Illuminate flat conductive and printed features through the coaxial path.
Restricted inspection cells
Fit a high-brightness coaxial source into an 86 × 50 × 36 mm envelope.
How the optical structure solves the inspection problem
Review the product-specific optical behavior, confirmed values and technical graphics together before selecting the final configuration.
- Compact construction
- The simple 86 × 50 × 36 mm body concentrates the optical and cooling paths into a small station envelope.
- Uniform coaxial field
- The 38 × 25 mm emitting aperture provides consistent axial illumination over the inspected strip.
- High-brightness red output
- The R configuration supplies red illumination for reflective surface and line-scan contrast.
- Compressor-air cooling
- Two air connections remove heat from the compact high-output housing.
Select from the actual optical, mechanical and electrical requirement
Do not select a custom light from appearance alone. Confirm target, contrast, field, interfaces and load together.
- 1
Confirm axial illumination
Use the coaxial path when the camera and illumination must share the target normal.
- 2
Check the active field
Keep the inspected strip inside the 38 × 25 mm emitting aperture.
- 3
Plan compressor air
Provide clean, stable cooling air to both housing connections.
- 4
Validate red response
Test glass, plastic-shell scratches or PCB features at the production exposure.
Read the product model pattern
LXV-COXL50-R- LXV
- Product prefix
- COXL
- Compact air-cooled coaxial line-scan family
- 50
- 50 mm body class
- R
- Red output
LXV-COXL50-R model range
Values remain attached to their own model and are not transferred between designs.
| Model | Colour | Boundary | Emitting aperture | Cooling | Voltage | Power |
|---|---|---|---|---|---|---|
| LXV-COXL50-R | Red | L86 × W50 × H36 mm | 38 × 25 mm | Compressor air | 24 V | 8.4 W |
Release the exact product drawing with the complete inspection station
Dimensions, openings, mounting, channels and thermal clearances belong to the selected product only.
- 01
Reserve the complete 86 × 50 × 36 mm boundary and align the camera with the coaxial optical axis.
- 02
Keep the 38 × 25 mm emitting aperture and its internal 32 × 22 mm reference region unobstructed.
- 03
Connect clean compressor air to both cooling ports and verify flow before energising the light.
- 04
Fasten the housing through the four M4 threaded holes with a maximum engagement depth of 5 mm.
- 05
Route the 500 mm lead and connector clear of the line-scan field and moving equipment.
- 06
Provide 24 V / 8.4 W capacity and validate uniformity, temperature and contrast at production duty.
