Edge-to-edge 200 lp/mm imaging for 2/3-inch sensors
A 16 mm C-mount lens designed to maintain 200 lp/mm resolution from image center to edge with reduced shading and distortion for cameras up to 2/3 inch.
- Model
- VS-1628H10M
- Single-model family
- Focal length
- 16 mm
- Fixed
- Resolution
- 200 lp/mm
- Center to edge
- Sensor
- up to 2/3 inch
- Maximum
- Mount
- C mount
- Camera interface
- Designed for up to 2/3-inch sensors
- 200 lp/mm resolution from center to edge
- Reduced shading
- Reduced distortion
- Adjustable F/2.8–22 aperture
- High-resolution electronics inspection
- Fine surface and edge inspection
- 2/3-inch area-camera inspection
- Tasks requiring consistent center-to-edge detail
Optical performance and model-specific limits
Use the numerical model limits together with MTF, field-curvature, distortion and transmission plots to evaluate image quality across the required field.
The model table contains this family’s available technical record
Focal length, aperture, working distance, distortion, illumination, filter and mount data are listed by model. A separate optical-performance or mechanical plot is not available for this family.
Use the single model only when its sensor, field and distance fit
Start with the sensor and required field of view, then compare optical and mechanical constraints within one complete model row.
VS-1628H10M- VS
- VST lens prefix
- 16
- 16 mm focal length
- 28
- F/2.8 maximum aperture
- H10M
- High-resolution 10 MP class
- 1
Define sensor and required field
Record sensor format, pixel size, inspection width and smallest feature.
- 2
Choose the optical geometry
Compare focal length or magnification with the listed working distance.
- 3
Check image quality limits
Review distortion, relative illumination, aperture and the retained performance plots.
- 4
Release one complete row
Keep mount, filter, body and optical values associated with the chosen model.
| Model | Focal length | F/# | Minimum object distance | Angle of view V×H | Mount | Max sensor |
|---|---|---|---|---|---|---|
| VS-1628H10M | 16 mm | 2.8–22 | 350 mm | 23.3°×30.7° | C mount | 2/3 inch |
Reserve the 350 mm object distance and validate edge resolution
This is a single-model record. Confirm the 2/3-inch image field, C-mount interface and 350 mm minimum object distance, then verify center-to-edge resolution on the actual sample.
Camera
Use a C-mount camera no larger than 2/3 inch.
Object distance
Keep the intended focus position at or beyond 350 mm.
Aperture
Balance F/2.8–22 against exposure and depth of field.
Acceptance test
Check edge resolution, shading and distortion with the final camera.
