What can I find in the LuxMV article library?
The library contains machine vision lighting notes, selection guidance, inspection application examples, controller integration topics, and company updates.
Technical library
Open the guide, then the series.
The guide names the surface and the series. Send the part from that page.
Article library
Which technical articles and selection guides fit your topic?
Showing 37-48 of 194 articles, page 4 of 17.
Selection
LXV-2LFX flat diffuse illumination
Check for a dark area near the viewing aperture. Compare centre and edge behaviour using reflective samples.
Read article
Selection
Output geometries for fibre illumination
Line, ring and spot fibre heads produce different coverage. Choose by inspection area as well as interface compatibility.
Read article
Selection
High-intensity line lighting and short exposures
Short exposures limit motion blur. Validate speed, pixel scale and trigger delay rather than simply increasing brightness.
Read article
Selection
Choosing lighting for automotive parts
Group automotive parts by finish, assembly position and inspection target. Include oil, colour and incoming-part variation.
Read article
Selection
Optical lens surfaces and outlines
Lens-surface defects and outline measurement need different light paths. Define whether the task concerns scratches, thickness or edge position.
Read articleSelection
Selecting fibre illuminators and light guides
Guide length, bending and coupling losses affect output. Verify brightness and uniformity in the final installed configuration.
Read article
Selection
Planning lighting for battery inspection
Plan separate lighting evaluations for tabs, welds, adhesive and wrapping. One arrangement need not suit every battery surface.
Read article
Selection
LXV-ML focused spot illumination
The focused spot should cover the target without excessive concentration. Check for local saturation when part height changes.
Read article
Selection
Corner coverage with square ring lighting
Check incidence on straight edges and all four corners separately. Correct centre exposure can still leave corner highlights.
Read article
Selection
LED chip defects and substrate colour variation
Evaluate LED-chip brightness and substrate colour separately. Distinguish true defects from colour variation and position shifts.
Read article
Selection
Grating coaxial line light on reflective surfaces
Establish a stable grating image before interpreting surface changes. The projected pattern itself must not become a false defect.
Read article
Selection
LXV-3DPC digital brightness control
Save channel values and trigger mode for each station. Verify that identical settings are reproduced after restarting.
Read articleHow are the technical library categories organized?
Each topic category targets a specific stage of optical system design. Use the summary table below to locate the right engineering notes.
| Category | Engineering Scope | Articles & Guides |
|---|---|---|
| Machine Vision Lighting | Light geometry, wavelength, diffusion, line-scan, backlight, coaxial, and fiber lighting notes. | 5 |
| Cameras & Lenses | Industrial cameras, lenses, focusing, depth of field, imaging parameters, and optical fundamentals. | 8 |
| Inspection Applications | Defect detection examples for semiconductor, automotive, electronics, packaging, and surface inspection. | 69 |
| Controllers & Integration | Controller modes, trigger timing, system integration, and production-line implementation notes. | 1 |
| Selection Guides | Practical selection methods for lighting, cameras, lenses, accuracy, and machine vision architecture. | 85 |
| Company News | Company updates, product announcements, and editorial news items. | 26 |
Questions
What questions help frame the discussion?
Can an article replace sample testing?
No. Articles provide selection context; final lighting choices work well when compared with the actual workpiece, camera, lens, and production conditions.